{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Self-centring lathe chuck with base and hard top jaws, DIN 702-4, Type: 160
Article no.: 313120 160
Article code:
Product details
Technical Data
| Number of tools | 3 pcs. | |
| Number of jaws | 3 pcs. | |
| Outer diameter | 164 mm | |
| Height without jaws | 63 mm | |
| Min. internal clamping range | 67 mm | |
| Internal clamping range max. | 174 mm | |
| Min. external clamping range | 5 mm | |
| Max. external clamping range | 161 mm | |
| Clamping stroke per jaw | 6.2 mm | |
| Aperture diameter | 42 mm | |
| Centring diameter | 145 mm | |
| Shape of width across flats | Square | |
| Square | 10 mm | |
| Max. speed | 5,400 min-1 | |
| Type of product | lathe chuck | |
| Material | Steel | |
| Standard | DIN 702-4 | |
| Operation | manual | |
| Weight | 9.3 kg | |
| Content | set |
Identification & Classification
| Article number | 313120 160 | |
| EAN / GTIN | 4019208227771 | |
| Manufacturer number | 437490 | |
| Manufacturer/responsible person | Röhm GmbH, Heinrich-Röhm-Straße 50, 89567 Sontheim/BRZ, Germany, www.roehm.biz |
Description
Version:
- Maximum concentricity and changeover accuracy.
- With jaw retention, centrically clamping.
- Large pass-through diameter.
- Accuracy twice that specified by DIN 6386.
- High clamping force with low force exertion.
- Higher speeds thanks to safety blocking slide.
- Jaws can quickly and easily be reversed or exchanged.
- Outer contour with drop-off wedge for water.
- Grease nipple for greasing all sliding faces.
Advantage:
Wherever extremely high clamping forces, high concentricity, and reliable continuous repeatability are required.
Application:
For machine spindles with recessed centring mount or for mounting using a flange. Secured with screws from the front. The flange blanks must always be fitted first to the machine and then to the chuck.
Material:
Entirely made of steel, fully surface-hardened.
Supplied with:
Includes: 1 set of jaws, 1 chuck key, 1 set fastening screws.
Note:
Bore E can be bored out: Size 160 to 45 mm, size 200 to 55 mm, size 250 to 75 mm, size 315 to 102 mm (at additional charge).