{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
ER clamping nut CENTRO P for HP sealing rings, Type CP for ER: 16CDI
Article no.: 309665 16CDI
Article code:
Product details
Technical Data
| Series | Centro P | |
| Manufacturer’s designation | FAHRION ER-Spannmutter CP für Dichtscheiben HP | |
| Outer diameter D | 24 mm | |
| Overall height h | 26.2 mm | |
| Version | with collar/ flange | |
| For min. clamping diameter | 1 mm | |
| For max. clamping diameter | 10 mm | |
| Thread size d1 | Tr21×1,5 | |
| Thread pitch P | 1.5 mm | |
| Left-hand thread | no | |
| Surface | polished | |
| Type of product | clamping nut | |
| Thread type | trapezoidal thread | |
| Material | steel | |
| Maximum tightening torque | 55 Nm |
Identification & Classification
| Article number | 309665 16CDI | |
| EAN / GTIN | 2050001704900 | |
| Manufacturer number | 4484200 | |
| Manufacturer/responsible person | Eugen Fahrion GmbH & Co. KG Präzisions-Spannwerkze, Forststraße 54, 73667 Kaisersbach, Germany, www.fahrion.de |
Description
Version:
Mini = all sizes with “M”, extremely slim design.
MiniSlim = sizes with “MS”, extremely super slim design.
Taper = all sizes with “C”.
Standard= all other sizes.
ER clamping nut CP, for HP sealing rings.
MiniSlim = sizes with “MS”, extremely super slim design.
Taper = all sizes with “C”.
Standard= all other sizes.
ER clamping nut CP, for HP sealing rings.
Suitable for:
FAHRION ER collet chuck CENTRO P and FAHRION ER collet chuck HDC.
Note:
FAHRION system ER clamping nuts type CP and sealing rings type HP do not fit on to other systems!
FAHRION ER clamping nut CENTRO P HDC not suitable for standard ER collet chucks CENTRO P.
Only the nominal size can be clamped (no intermediate range!)
FAHRION ER clamping nut CENTRO P HDC not suitable for standard ER collet chucks CENTRO P.
Only the nominal size can be clamped (no intermediate range!)