{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Parting-off / grooving insert, CU7025, Groove width w: 5mm
Article no.: 273703 5
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Blade thickness | 5 mm | |
| Insert length | 26 mm | |
| Insert version | neutral | |
| Corner radius, right | 0.3 mm | |
| Corner radius, left | 0.3 mm | |
| Groove width | 5 mm | |
| ISO-Code | HOG-LCMX255003 | |
| Tool material | HC-M25 | |
| Cutting media, manufacturer’s designation | CU7025 | |
| Coating | uncoated | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | HOG | |
| Interface coding for insert according to ISO TS 13399-60 | HOG | |
| Insert designation | LCMX | |
| Type of product | grooving insert | |
| With ISO code | yes | |
| Number of teeth | 2 pcs. | |
| Direction of action | neutral | |
| Suitable for material | steel (P) | |
| Machining method | grooving and parting off (EEA) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Chip breaker | yes | |
| Cutter version | chamfered and rounded (S) | |
| Cutting conditions | continuous | |
| Number of potential uses | 2 pcs. | |
| Weight | 62 g | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 273703 5 | |
| EAN / GTIN | 4045197579058 | |
| Manufacturer number | 273703 5 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
210
P
170
P
140
Description
Version:
Chip breaker for small diameters and reduction in cutting forces.