{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Komet KUB Pentron® indexable drill with ABS® shank, for indexable inserts SOGX
Article no.: 236604 26
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, axially concentric | |
| Cooling lubricant | yes | |
| Series | KUB Pentron® | |
| Manufacturer’s designation | KOMET KUB Pentron® Wendeplatten-Vollbohrer mit ABS® Schaft, für Wendeschneidplatten SOGX | |
| Interface position | on the machine | |
| Holder type | modular taper interface with running track ball system | |
| Interface coding | ABS05000115 | |
| Shank diameter | 50 mm | |
| Shank length | 31 mm | |
| Cutter diameter, min. | 26 mm | |
| Flute length | 148 mm | |
| Distance from cutter corner to cutter tip | 0.38 mm | |
| Number of cutting edges, total | 1 | |
| Twist angle | 10 degrees | |
| Angle, 1st step | 180 degrees | |
| Interface coding for insert | Artikelspezifisch - siehe articles_specific; SO0803083N | |
| Insert designation | SOGX | |
| Interface | joint 1 | |
| Gauge length | 163 mm | |
| Usable length | 130 mm | |
| Overall length | 194 mm | |
| Weight | 680 g | |
| Cutting direction | right-hand cutting | |
| Standard | DIN4000-86 | |
| Machining method | drilling into solid material | |
| Machining strategy | HPC | |
| Type of product | indexable drill for cutter inserts | |
| Content | single part |
Identification & Classification
| Article number | 236604 26 | |
| EAN / GTIN | 4047109181878 | |
| Manufacturer number | U45 52600 | |
| Manufacturer/responsible person | Plastics & Seals s.r.l., Via Bene Vagienna 19, 12060 Lequio Tanaro, Italia |
Description
Version:
Bore tolerance: D − 0.1 / + 0.35
Application:
Recommendation:
When spot-drilling reduce the feed rate to 70%.
Note:
- For use only under stable machining conditions.
- Version 2×D and 3×D with ABS® shank available on request.
- Offset-axis drilling up to Vmax = 0.25 mm.
- Maximum ⌀ = D + 0.5 mm achievable by offsetting.
- Version with PSC shank available on request.