{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Komet KUB Pentron® indexable drill with ABS® shank, for indexable inserts SOGX
Article no.: 236604 25
Article code:
Product details
Technical Data
| Series | KUB Pentron® | |
| Number of cutting edges, total | 1 | |
| Cutter diameter, min. Dc | 25 mm | |
| Overall length L | 189 mm | |
| Usable length L1 | 125 mm | |
| Gauge length A | 158 mm | |
| Shank diameter DS | 50 mm | |
| Through-coolant | yes | |
| Holder type | plain shank | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Interface position | on the machine | |
| Interface coding | ABS05000115 | |
| Holder version | metric | |
| Holder size, metric | 50 mm | |
| Length of shank LS | 31 mm | |
| Cooling lubricant | yes | |
| Flute length | 143 mm | |
| Distance from cutter corner to cutter tip | 0.38 mm | |
| Twist angle | 10 degrees | |
| Angle, 1st step | 180 degrees | |
| Interface | joint 1 | |
| Insert thickness T | 3.18 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | SO0803083N | |
| Insert designation | SOGX 080308 24-... | |
| Weight | 640 g | |
| Cutting direction | right-hand cutting | |
| Machining method | drilling into solid material (BVB) | |
| Machining strategy | HPC | |
| Type of product | indexable drill for cutter inserts | |
| Maximum adjustment limit V | 0.25 mm | |
| Drill depth for indexable insert drill up to | 5×D | |
| Use for drilling | limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited drilling with oblique exit; limited oblique spot drilling | |
| Content | single part |
Identification & Classification
| Article number | 236604 25 | |
| EAN / GTIN | 4047109181854 | |
| Manufacturer number | U45 52500 | |
| Manufacturer/responsible person | CERATIZIT Luxembourg S.á r.l., Route de Holzem 101, 8232 Mamer, Luxembourg, www.ceratizit.com |
Description
Version:
Bore tolerance: D − 0.1 / + 0.35
Application:
Recommendation:
When spot-drilling reduce the feed rate to 70%.
Note:
- For use only under stable machining conditions.
- Version 2×D and 3×D with ABS® shank available on request.
- Offset-axis drilling up to Vmax = 0.25 mm.
- Maximum ⌀ = D + 0.5 mm achievable by offsetting.
- Version with PSC shank available on request.