{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Side milling cutter with collar Width ap = 14 mm, ⌀ D: 125mm
Article no.: 218568 125
Article code:
Product details
Technical Data
| Overall length L | 50 mm | |
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Interface position | on the machine | |
| Holder type | milling arbor mounting | |
| Interface coding | FDA04001200 | |
| Holder version | metric | |
| Holder size, metric | 40 mm | |
| Type of mounting | hole (internal mounting) | |
| Cutter diameter Dc | 125 mm | |
| Kragendurchmesser d1 | 70 mm | |
| Mounting hole diameter D3 | 40 mm | |
| Cutting width min. b | 14 mm | |
| Number of effective cutters (peripheral side) Z | 12 | |
| Number of effective cutters (end face) Z | 4 | |
| Number of insert mounting levels | 3 | |
| Number of inserts per mounting level | 4 mm | |
| Cooling lubricant | yes | |
| Type of fastening for insert | S – screwed through the bore (with counterbore) | |
| Number of inserts total | 12 | |
| Manufacturer’s designation | Scheibenfräser mit Bund | |
| Interface | joint 1 | |
| Weight | 1,060 g | |
| Cutting direction | right-hand cutting | |
| Machining method | parting-off milling (FTR); slot milling (FNU) | |
| Type of product | side milling cutter, three-sided cutting | |
| Suitable indexable insert | SNHX | |
| Indexable insert size | 12 | |
| Maximum cutting depth | 23.7 mm | |
| Cutting depth min. | 14 mm |
Identification & Classification
| Article number | 218568 125 | |
| EAN / GTIN | 4045197530608 | |
| Manufacturer number | 218568 125 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Side milling cutters of robust special steel for reduced vibration.
Application:
For milling grooves and slots. For flat or non-flat slot base.
Spare part:
No. 219983 (IP15; 2.2 Nm).
Attention:
To obtain a flat slot base, please use neutral, left-hand and right-hand indexable inserts, where the neutral insert is mounted on the middle insert range.