{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Side milling cutter with collar Width ap = 14 mm, ⌀ D: 80mm
Article no.: 218568 80
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | no | |
| Manufacturer’s designation | Scheibenfräser mit Bund | |
| Cutter diameter | 80 mm | |
| Mounting hole diameter | 22 mm | |
| Countersink diameter of mounting hole | 40 mm | |
| Cutting width min. | 14 mm | |
| Cutting width max. | 20 mm | |
| Hub width | 15 mm | |
| Relief angle | 0 degrees | |
| Side rake angle | 0 degrees | |
| Number of effective cutters (peripheral side) | 6 | |
| Number of effective cutters (end face) | 2 | |
| Type of fastening for insert | P | |
| Number of inserts total | 6 | |
| Overall length | 50 mm | |
| Weight | 440 g | |
| Cutting direction | right-hand cutting | |
| Machining method | parting-off milling; slot milling | |
| Type of product | side milling cutter, three-sided cutting |
Identification & Classification
| Article number | 218568 80 | |
| EAN / GTIN | 4045197530592 | |
| Manufacturer number | 218568 80 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Side milling cutters of robust special steel for reduced vibration.
Application:
For milling grooves and slots. For flat or non-flat slot base.
Spare part:
No. 219983 (IP15; 2.2 Nm).
Attention:
To obtain a flat slot base, please use neutral, left-hand and right-hand indexable inserts, where the neutral insert is mounted on the middle insert range.