{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Alternative article:
-
Article no.: 212868 ST1400
Indexable insert for milling XDMT090416ZDSR, for high feed rate indexable face mills, HB4030
Article no.: 212866 ST1400
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | XDMT090416ZDSR | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable | |
| Base form | triangular | |
| Insert width | 4.84 mm | |
| Blade thickness | 4.76 mm | |
| Insert length | 4.84 mm | |
| Insert version | neutral | |
| Cutting edge length | 4.84 mm | |
| Cutting edge height | 4.2 mm | |
| Insert diameter | 9.525 mm | |
| Corner radius | 1.6 mm | |
| Corner chamfer length | 1.77 mm | |
| Corner chamfer angle | 20 degrees | |
| Corner angle | 101 degrees | |
| Rake angle | 0 degrees | |
| Normal clearance angle (main cutting edge) | 15 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Cutting conditions | interrupted | |
| Cutting edge length, limited | 3.79 mm | |
| ISO-Code | XDMT090416ZDSR | |
| Type of chip breaker | SR | |
| Tool material | Carbide | |
| Machining group | M (stainless steel); P (steel); S (difficult-to-machine materials) | |
| Tool application group | HOG | |
| Cutting media, manufacturer’s designation | HB4030 | |
| Coating | TiCN | |
| Grade | HB4030 | |
| Insert thickness | 4.76 mm | |
| Type of fastening for insert | M (with cyl. hole clamped from above and via the hole) | |
| Interface coding for insert | XDMT090416ZDSR | |
| Interface coding for insert according to ISO TS 13399-60 | XDMT090416ZDSR | |
| Insert designation | XDMT090416ZDSR | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 3 pcs. | |
| Direction of action | neutral | |
| Suitable for material | heat-resistant super-alloys (S); stainless steel (M); steel (P) | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | chamfered (T) | |
| Weight | 40 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 212866 ST1400 | |
| EAN / GTIN | 4045197943125 | |
| Manufacturer number | 212866 ST1400 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
240
P
220
Description
Note:
Standard application values for ae = 0.5...1×D / ap max