{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
TPC milling head with chip separators 3×D, HB730, ⌀ D f8: 16mm
Article no.: 210344 16
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Cutting depth min. ap | 0.3 mm | |
| Series | TopCut | |
| Max. cutting depth ap | 48 mm | |
| Manufacturer’s designation | Fräskopf TPC mit Spanteilern 3×D | |
| Interface position | on the machine | |
| Interface coding | HOG-PGK16 | |
| Tool material | solid carbide | |
| Cutting media, manufacturer’s designation | HB7730 | |
| Coating | AlCrN | |
| Grade | HB730 | |
| Interface | joint 1 | |
| Gauge length A | 56 mm | |
| Overall length L | 73.3 mm | |
| Weight | 170 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | Werksnorm | |
| Machining method | shoulder milling (FEC) | |
| Machining strategy | TPC | |
| Cutter diameter D1 | 16 mm | |
| Tolerance class | f8 | |
| Cutting edge length L1 | 48 mm | |
| Head length L | 56 mm | |
| Relief angle | 0 degrees | |
| Side rake angle | 0 degrees | |
| Number of effective cutters (peripheral side) | 5 | |
| Number of effective cutters (end face) | 5 | |
| Twist direction | right-hand | |
| Helix angle | 45 degrees | |
| Corner chamfer width b | 0.32 mm | |
| Corner chamfer angle | 45 degrees | |
| Direction of infeed | horizontal; vertical | |
| Properties of helix angle | unequal spacing | |
| Content | single part | |
| Correction factor fz | 2.5 | |
| Cutting depth in use | Side milling | |
| Type of product | end / face mill |
Identification & Classification
| Article number | 210344 16 | |
| EAN / GTIN | 4045197722355 | |
| Manufacturer number | 210344 16 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
210
P
170
P
150
P
130
P
110
H
50
H
40
M
80
M
50
S
80
K
160
Description
Version:
Milling head specially designed for TPC applications.
Note:
ae max = 0.08×D for TPC machining.
hmax: The values stated in the table are maximum values.
Cutting data for conventional milling can be found in the machining handbook No. 110020.
hmax: The values stated in the table are maximum values.
Cutting data for conventional milling can be found in the machining handbook No. 110020.