{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Solid carbide milling cutter MTC, SiTiN, ⌀ f8 DC: 12mm
Article no.: 202392 12
Copy
Article code:
Copy
- Materiale da taglio: HMI
- Norma: DIN 6527
- Modello: N
- Tolerance nominal ⌀: f8
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 12 mm | |
| Rivestimento | SiTiN | |
| Materiale da taglio | HMI | |
| Norma | DIN 6527 | |
| Modello | N | |
| Tolerance nominal ⌀ | f8 | |
| No. of teeth Z | 3 | |
| Helix angle | 45 degrees | |
| Caratteristica angolo dell’elica | differente | |
| Passo dei taglienti | differente | |
| Direction of infeed | horizontal, oblique and vertical | |
| Larghezza di fresatura ae per operazioni di fresatura | Scanalatura piena con profondità di taglio 1×D; 0,5×D per contornatura | |
| Shank | DIN 6535 HB to h6 | |
| Balance quality with shank | G 2.5 with HB | |
| Passaggio interno per LR | no | |
| Strategia di truciolatura | MTC | |
| Flute length Lc | 26 mm | |
| Overhang length L1 incl. recess | 36 mm | |
| Recess ⌀ D1 | 11.7 mm | |
| Overall length L | 83 mm | |
| Shank ⌀ Ds | 12 mm | |
| Corner chamfer width at 45° | 0.2 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.06 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.072 mm | |
| Colore collarino | verde | |
| Tipo di prodotto | Frese per spallamenti |
Identification & Classification
| Article number |
202392 12
Copy |
|
| EAN / GTIN |
4045197538888
Copy |
|
| Manufacturer number |
202392 12
Copy |
|
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, www.hoffmann-group.com |
Application Table
suitable for / [m/min]
P
ISO code:
250
suitable for / [m/min]
P
ISO code:
220
suitable for / [m/min]
P
ISO code:
200
suitable for / [m/min]
P
ISO code:
190
suitable for / [m/min]
P
ISO code:
170
suitable for / [m/min]
H
ISO code:
90
suitable for / [m/min]
H
ISO code:
60
suitable for / [m/min]
M
ISO code:
130
suitable for / [m/min]
M
ISO code:
100
suitable for / [m/min]
S
ISO code:
50
suitable for / [m/min]
K
ISO code:
160
suitable for / [m/min]
suitable for / [m/min]
suitable for / [m/min]
suitable for / [m/min]
suitable for / [m/min]
Description
Version:
Special flute profile. Strengthened core.
MTC rough milling up to 1.5×D in solid material.
Eccentric relief ground.
Lengths similar to DIN 6527 long.
MTC rough milling up to 1.5×D in solid material.
Eccentric relief ground.
Lengths similar to DIN 6527 long.
Application:
Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres.