{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Solid carbide milling cutter HPC, ZOX, ⌀ f8 DC: 4mm
Article no.: 202248 4
Article code:
Product details
Technical Data
| Coating | ZOX | |
| Machining strategy | HPC | |
| Number of effective cutters (peripheral side) Z | 3 | |
| Cutter diameter Dc | 4 mm | |
| Cutting edge length Lc | 11 mm | |
| Overall length L | 57 mm | |
| Shank diameter DS | 6 mm | |
| Twist angle | 45 degrees | |
| Tolerance class | f8 | |
| Corner chamfer width | 0.1 mm | |
| Tool material | solid carbide | |
| Gauge length A | 18 mm | |
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Wet minimum | suitable only under restricted conditions | |
| Vorschub pro Zahn Besäumen fz | 0.045 mm | |
| Max. cutting depth, Full slot milling | 4 mm | |
| Max. cutting depth, Side milling | 11 mm | |
| Wet maximum | suitable | |
| Vorschub pro Zahn Nutenfräsen fz | 0.035 mm | |
| Eingriffsbreite max. ae | 1×D; 0,5×D | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL00600105 | |
| Holder shape | plain shank | |
| Holder version | metric | |
| Holder size, metric | 6 mm | |
| Dry machining | suitable only under restricted conditions | |
| Holder tolerance class | h6 | |
| Length of shank LS | 38 mm | |
| Shank type | HA | |
| Air | suitable only under restricted conditions | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | VHM-Fräser HPC, ZOX | |
| Machining group | N (non-ferrous metals) | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Recess diameter D1 | 3.7 mm | |
| Balancing quality | G 2,5 | |
| Number of effective cutters (end face) Z | 3 | |
| Twist direction | right-hand | |
| Corner / edge | 1 | |
| Corner version | as chamfer | |
| Corner chamfer angle | 45 degrees | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Number of clamping slots | 3 | |
| Helix angle characteristic | unequal spacing | |
| Tool application group | W | |
| Cutting media, manufacturer’s designation | VHM TIALN | |
| Vorschub pro Zahn in | alu short-chipping | |
| Interface | joint 1 | |
| Tolerance class | f8 | |
| Weight | 16 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | Werksnorm | |
| Machining method | shoulder milling (FEC); slot milling (FNU) | |
| Colour ring | yellow | |
| Type of product | shoulder mill | |
| Content | single part | |
| Correction factor fz | 3 | |
| Cutting depth min. | 0.1 mm | |
| Cutting depth in use | Full slot milling; Side milling |
Identification & Classification
| Article number | 202248 4 | |
| EAN / GTIN | 4045197271518 | |
| Manufacturer number | 202248 4 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
500
N
480
N
240
N
240
Description
Version:
Sturdy roughing end mill without knuckle profile.
With strong core, special chip breaker recesses and large polished flutes.
With strong core, special chip breaker recesses and large polished flutes.
Application:
For roughing milling with high demands on the component surface.
Note:
NEW GENERATION AVAILABLE!
Recommended successor product is No. 202004.
Recommended successor product is No. 202004.