{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT Master Tap INOX machine tap HSS-E-PM Form E 6HX, TiAlN, M: M2
Article no.: 135736 M2
Article code:
Product details
Technical Data
| Thread type | metric ISO coarse thread | |
| Tool material | HSS-E-PM | |
| Coating | TiAlN | |
| Thread D | M2 | |
| Thread pitch | 0.4 mm | |
| Core hole diameter | 1.6 mm | |
| Nominal diameter of metric thread D | 2 mm | |
| Overall length L | 45 mm | |
| Shank diameter DS | 2.8 mm | |
| Square-drive width across flats □ | 2.1 mm | |
| Thread tolerance class | ISO 2X 6HX | |
| Taper lead form | E | |
| Application for type of drilling | blind hole | |
| Twist angle | 45 degrees | |
| Standard | DIN 371 | |
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Series | Master Tap | |
| Manufacturer’s designation | GARANT Master Tap INOX Maschinen-Gewindebohrer HSS-E-PM Form E | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Length of shank LS | 31.34 mm | |
| Chisel edge diameter | 1.5 mm | |
| Length of tapping part Lc | 9.72 mm | |
| Tap infeed length | 0.7 mm | |
| Taper lead angle | 21.84 degrees | |
| Number of teeth | 3 | |
| Twist direction | right-hand | |
| Type of thread-cutting tool | machine tap for dynamic machining | |
| To depth (x diameter) | 2.5 | |
| Number of clamping slots | 3 | |
| Flank angle | 60 degrees | |
| Machining group | M (stainless steel) | |
| Cutting media, manufacturer’s designation | HSS-E PM | |
| Interface | joint 1 | |
| Gauge length A | 45 mm | |
| Weight | 2 g | |
| Cutting direction | right-hand cutting | |
| Colour ring | blue | |
| Type of product | taps | |
| Thread profile | full profile V |
Identification & Classification
| Article number | 135736 M2 | |
| EAN / GTIN | 4062406081201 | |
| Manufacturer number | 135736 M2 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
28
P
23
P
23
P
12
M
11
M
9
Description
Version:
High-performance tap, specially developed for good process reliability in stainless and acid-resistant steels and duplex materials.
The 45° helix angle of the flutes facilitates chip formation especially in ductile austenitic CrNi steels.
Form E (lead chamfer: 1.5 - 2 turns).
The 45° helix angle of the flutes facilitates chip formation especially in ductile austenitic CrNi steels.
- HSS-E-PM tool material for a high degree of wear resistance
- The latest generation of TiALN multi-layer coating
- Parameterised flute geometry for optimum chip formation and torsional rigidity
Form E (lead chamfer: 1.5 - 2 turns).