{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Machine face reamer Diameter and fit are configurable 12 mm
Article no.: 162830 12
Article code:
- Tool material: HSS E
- Standard: Manufacturer’s standard
- Through-coolant: no
- Shank: Cylinderskaft med e9
Product details
Technical Data
| Coating | uncoated | |
| Tool material | HSS E | |
| Standard | Manufacturer’s standard | |
| Through-coolant | no | |
| Shank | Cylinderskaft med e9 | |
| ⌀ range | 11.201 mm - 12.220 mm | |
| Plunge cutting | 4.5 mm | |
| Flute length Lc | 26 mm | |
| Overhang L1 | 96.5 mm | |
| Overall length L | 151 mm | |
| Number of cutting edges Z | 6 | |
| Shank ⌀ Ds | 12 mm | |
| Colour ring | green | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 162830 12 | |
| EAN / GTIN | 4062406166472 |
Application Table
N
25
N
15
P
12
P
12
P
12
P
10
P
10
K
10
N
20
Description
Version:
Chucking reamer cutting on the end face to achieve the most accurate size possible. The optimised end face cutting enables a precise alignment fit of the hole that is produced. Straight flute machine chucking reamers with long flutes for optimum chip evacuation.
Application:
For correction of minor positioning errors in the preceding drilling operations. For production of sequential holes with alignments that exactly match. For the highest demands for straightness of holes. For reaming of through holes and right to the bottom of blind holes.