{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Machine face reamer Diameter and fit are configurable, uncoated, Nominal ⌀ DC: 11mm
Article no.: 162830 11
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Cutter diameter 1st step max. | 11.2 mm | |
| Interval configurability | 0.001 mm | |
| Tolerance zone | A; B; C; CD; D; E; EF; F; FG; G; H; J; JS; K; M; N; P; R; S; T; U; V; X; Y; Z; ZA; ZB; ZC | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Holder tolerance class | h6 | |
| Shank diameter | 11 mm | |
| Quality | 10; 11; 12; 13; 6; 7; 8; 9 | |
| Cutter diameter 1st step min. | 10.201 mm | |
| Configurable | yes | |
| Cutting edge length | 26 mm | |
| Tap infeed length | 4.5 mm | |
| Number of teeth | 6 | |
| Twist direction | neutral, straight | |
| Type of reaming tool | for through holes and blind holes | |
| Type of drive | machine reamer | |
| Tool material | HSS-E | |
| Coating | uncoated | |
| Interface | joint 1 | |
| Gauge length | 89 mm | |
| Usable length | 87 mm | |
| Overall length | 142 mm | |
| Cutting direction | right-hand cutting | |
| Standard | Werksnorm | |
| Colour ring | green | |
| Type of product | cylindrical reamer | |
| Content | single part |
Identification & Classification
| Article number | 162830 11 | |
| EAN / GTIN | 4062406166465 | |
| Manufacturer number | 162830 11 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
25
N
15
P
12
P
12
P
12
P
10
P
10
K
10
N
20
Description
Version:
Chucking reamer cutting on the end face to achieve the most accurate size possible. The optimised end face cutting enables a precise alignment fit of the hole that is produced. Straight flute machine chucking reamers with long flutes for optimum chip evacuation.
Application:
For correction of minor positioning errors in the preceding drilling operations. For production of sequential holes with alignments that exactly match. For the highest demands for straightness of holes. For reaming of through holes and right to the bottom of blind holes.