{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Pen extractor set UNC
Article no.: U88200 UNC
Copy
Article code:
Copy
Product details
Technical Data
| Type of product | Three-leg extractor |
Identification & Classification
| Article number |
U88200 UNC
Copy |
|
| EAN / GTIN |
4021176079900
Copy |
Description
Description:
Sturdy extractor (galvanised) with ergonomically shaped sliding hammer.
Application:
For extracting and pulling off parts with internal threads (taper pins or dowel pins) and ball bearings. The appropriate adapter or internal extractor is attached to the part to be extracted, which is then pulled off by firm strikes with the sliding hammer.
Application:
For extracting and pulling off parts with internal threads (taper pins or dowel pins) and ball bearings. The appropriate adapter or internal extractor is attached to the part to be extracted, which is then pulled off by firm strikes with the sliding hammer.
This Kukko Pin Extractor set with sliding hammer in plastic case for UNC threads is a sturdy, galvanized German pin extractor with ergonomically shaped sliding hammer for SAE measurements.
Specifications:
For extracting and pulling off parts with internal threads (taper pins or dowel pins) and ball bearings. The appropriate adapter or internal extractor is attached to the part to be extracted, which is then pulled off by firm strikes with the sliding hammer. Pin Extractor in Plastic Case UNC Threads
Specifications:
For extracting and pulling off parts with internal threads (taper pins or dowel pins) and ball bearings. The appropriate adapter or internal extractor is attached to the part to be extracted, which is then pulled off by firm strikes with the sliding hammer. Pin Extractor in Plastic Case UNC Threads
Feature:
Adapter for internal extractor: M7×M12, M10×M12, 15-16G×M12Hammer mass: 0.9 kgHammer travel: 230 mmSuitable for UNC threads: 1/4″ - 20; 5/16″ - 18; 3/8″ - 16; 7/16″ - 14