{{ name }}
Nr art. {{ combinedCodeWithHighlight }}
Nr własny produktu:
EAN / GTIN:
Numer producenta:
Nr katalogowy:
Seaming tool PS55
Nr art.: PS55
Nr własny produktu:
UWAGA:
Ten produkt jest zamawiany bezpośrednio u producenta i nie znajduje się w naszym magazynie – czas dostawy może być wydłużony.Ostateczna cena zostanie wyświetlona po dodaniu produktu do koszyka i przejściu do kasy.Produkt nie podlega zwrotowi.
InformacjeSzczegóły produktu
Identyfikacja i klasyfikacja
| Numer artykułu | PS55 | |
| EAN / GTIN | 4008158027050 | |
| Numer producenta | PS55 | |
| Numer L | L80030 447 | |
| Producent/osoba odpowiedzialna | BESSEY Tool GmbH & Co. KG, Muehlenwieserstraße 40, 74321 Bietigheim-Bissingen, Deutschland, www.bessey.de |
Opis
Opis:
- For clamping and positioning components with a smooth surface, such as ceramic, granite, Corian
® , plastic, sheet metal and glass, which require low clamping forces (up to 260 N) - Clamping levers on the suction cups ensure rapid handling
- Cam lever to compensate for differing heights at the joint
Cecha szcz.:
- Width: 144 mm
- Length: 363 mm
- Material / surface:
- Aluminium base, anodized
- Galvanized steel rail
- Spindle with trapezoidal thread made of rolled steel, galvanized
- Handle made of 2-component plastic
- Remaining plastic parts
- Wingspan: 10-55 mm
Zaleta:
Gentle suction cups
- Easy to use. Engage the handle on the suction cups to generate a vacuum, and the seaming tool adheres automatically to the sheet.
- The two levers on the guide bars can be used to easily control the height differences which can occur when pulling together the sheets.
- Cold‐drawn, electro‐galvanised guide rods in sturdy aluminium profiles prevent the seaming tool from bending open during the clamping process and hold the seaming tool on one level. This guarantees a precise finished result.
- With the perfect handle, you can achieve up to 260 N of clamping force in the horizontal plane. This need is met by the high-quality two-component plastic handle with easy-to-move trapezoidal thread spindle.
Zastosowanie:
- Interior fittings
- Furniture and joinery works
- Kitchen construction and shop fitting
Wskazówka:
- Danger warnings:
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Care instructions:
- Clean the rails with solvent
- Clean and oil the spindle regularly
- Clean rubber plates with clear water if necessary (keep free of dust)