{{ name }}
Nr art. {{ combinedCodeWithHighlight }}
Nr własny produktu:
EAN / GTIN:
Numer producenta:
Nr katalogowy:
3M™ Fit Test Kit, Qualitative, Sweet, FT-10
Nr art.: 7000001898
Nr własny produktu:
UWAGA:
Ten produkt jest zamawiany bezpośrednio u producenta i nie znajduje się w naszym magazynie – czas dostawy może być wydłużony.Ostateczna cena zostanie wyświetlona po dodaniu produktu do koszyka i przejściu do kasy.Produkt nie podlega zwrotowi.
InformacjeSzczegóły produktu
Dane techniczne
| Seria | FT-10 | |
| Oznaczenie producenta | 3M™ Dichtsitz-Prüfkit; FT-10; Qualitativ; Süß | |
| Rodzaj produktu | Pałeczki testowe |
Identyfikacja i klasyfikacja
| Numer artykułu | 7000001898 | |
| EAN / GTIN | 00051138163587 | |
| Numer producenta | 7000001898 | |
| Numer L | L01110 143 | |
| Producent/osoba odpowiedzialna | 3M DEUTSCHLAND GmbH PELTOR Service Center, Carl-Schurz-Straße 1, 41453 Neuss, Deutschland, www.3mdeutschland.de |
Opis
Opis:
The products can be used to validate face-to-respirator seal on any disposable respirators or half mask respirators. To fit test a halfmask respirator, it must be fitted with a P3 particulate filter for the fit test. 3M™ offers two Qualitative Fit Test Apparatus Kits FT-10 (Sweet) and FT-30 (Bitter). FT-10 uses a test solution of sodium saccharin that produces a sweet tasting aerosol. FT-30 uses a test solution of denatonium benzoate to produce a bitter taste. The choice between the bitter and sweet test kit is a personal one. However, a small percentage of the population is unable to detect saccharin in which case the bitter test must be used (and visa versa if the bitter cannot be detected then the sweet must be used). 3M recommends users are face-fit tested before using a respirator and repeated regularly as part of their occupational respiratory protection program. Follow all applicable national and other guidance with respect to face fit testing. If not available, please see ISO 16975-3 or contact 3M.
Zaleta:
- Qualitative fit test kit including hood, collar, 2 nebulisers, sweet tasting sensitivity solution, sweet tasting fit test solution and laminated user instructions.
- FT-10 uses a test solution of sodium saccharin that produces a sweet tasting spray
- Spare hoods, nebulisers and solutions are also available
- Spare hoods, nebulisers and solutions are available for the fit test kits.
- For Occupational Use Only
- 3M™ recommends users are face-fit tested before using a respirator and repeated regularly as part of their occupational respiratory protection program.
- Follow all applicable national and other guidance with respect to face fit testing.
- In the UK please see further guidance from the Health and Safety Executive (HSE) and their guidance document INDG 479 or contact 3M™
Zalecenie:
- Obstetric and gynaecological
- General surgery
- Urological
- Day Surgery