{{ name }}
Nr art. {{ combinedCodeWithHighlight }}
Nr własny produktu:
EAN / GTIN:
Numer producenta:
Nr katalogowy:
UniversalGrip blind rivet aluminium/stainless steel 3.2 x 8, 500 pieces
Nr art.: 1816967
Nr własny produktu:
UWAGA:
Ten produkt jest zamawiany bezpośrednio u producenta i nie znajduje się w naszym magazynie – czas dostawy może być wydłużony.Ostateczna cena zostanie wyświetlona po dodaniu produktu do koszyka i przejściu do kasy.Produkt nie podlega zwrotowi.
InformacjeSzczegóły produktu
Dane techniczne
| Rodzaj produktu | Nity | |
| Liczba | 500 | |
| Materiał trzpienia nitów | Stal stopowa | |
| Materiał nitu drążonego | Aluminiowe | |
| Kształt główki | FK |
Identyfikacja i klasyfikacja
| Numer artykułu | 1816967 | |
| EAN / GTIN | 4007081128988 | |
| Numer producenta | 1816967 | |
| Producent/osoba odpowiedzialna | SFS Group Germany GmbH Division Medical - GESIPA, Nordendstraße 13-39, 64546 MÖRFELDEN-WALLDORF, Deutschland, www.gesipa.de |
Opis
Opis:
UniversalGrip - The PolyGrip connector for hard-to-reach riveting points
The use of extended nose pieces is recommended for applications in which there is very little space for the processing tool due to the design (interfering edges, deep recesses). However, a blind rivet with an extended mandrel is essential for this. The UniversalGrip blind rivet is now available for these applications. The UniversalGrip combines the advantages of the PolyGrip with those of an extended rivet mandrel and can be used with all our nosepieces with special lengths.
Area of application:
The use of extended nose pieces is recommended for applications in which there is very little space for the processing tool due to the design (interfering edges, deep recesses). However, a blind rivet with an extended mandrel is essential for this. The UniversalGrip blind rivet is now available for these applications. The UniversalGrip combines the advantages of the PolyGrip with those of an extended rivet mandrel and can be used with all our nosepieces with special lengths.
Area of application:
- Hard-to-reach rivet points of any kind, e.g. rivets in profiles
- Riveting close to component edges
- Long rivet mandrel - enables the use of extended nosepieces
- Large clamping range - one dimension can replace up to five standard dimensions
- Economical - can be used with standard device and extended standard mouthpiece
- Standardisation - even for small annual requirements
Cecha szcz.:
- Diameter of the drill bit: 3.3 mm
- max. Clamping range: 5 mm
- min. Clamping range: 0.5 mm
- Material of the sleeve: Aluminium alloy
- Material of the pen: Stainless steel A2
- gas/water-tight: No
- spreading possible: No
- Length: 113 mm
- Head shape: Dome head
- min. Clamping length: 0.5 mm
- max. Clamping length: 5 mm
- Diameter of the head: 6.5 mm