{{ name }}
Nr art. {{ combinedCodeWithHighlight }}
Nr własny produktu:
EAN / GTIN:
Numer producenta:
Obrotowe kły tokarskie, spłaszczone do wymiennych ostrzy 4
Nr art.: 321266 4
Nr własny produktu:
Szczegóły produktu
Dane techniczne
| Morse taper | MT4 | |
| Body ⌀ D | 60 mm | |
| Reach B | 85 mm | |
| maximum radial run-out | 0.003 mm | |
| maximum speed | 10,000 rpm | |
| for workpiece weight | 400 kg | |
| Length 1 | 74 mm | |
| L2 | 10 mm | |
| External ⌀ D1 | 14 mm | |
| suitable for colour code | K14 | |
| śruba dociskowa | tak | |
| Rodzaj produktu | kieł centrujący |
Numery identyfikacyjne i klasyfikacje
| Numer artykułu | 321266 4 | |
| EAN / GTIN | 4062406572310 |
Opis
Version:
Extremely slim casing, flattened on one side, for optimum access; very high concentricity due to high-end bearing; also suitable for grinding applications.
- With extended centre and draw-off nut, specially for CNC machines.
- Complete tool hardened and ground.
- Special roller bearings for high loads and speeds.
- Live centre through hardened, can be reground many times.
- Maintenance-free due to lifetime lubrication.
- Special seal prevents ingress of dirt and coolant.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
For high loads and speeds, specially for NC machines.
Flexible application thanks to exchangeable inserts. For general use on turrets and counter-spindles on CNC machines.
Flexible application thanks to exchangeable inserts. For general use on turrets and counter-spindles on CNC machines.
Optional extras:
Note:
Changing the inserts in the key surfaces by counter-rotation.
Draw-off nut for NC machines to remove tip from tailstock sleeve.
Draw-off nut for NC machines to remove tip from tailstock sleeve.