{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Electronic torque tool tester “TTT”
Article no.: 654340
Article code:
Click to enlarge image
Click to enlarge image
Optional accessories: Calibration device for TST, TTT in conjunction with sensors FMT up to 1500 Nm.
Product details
Technical Data
| AC supply voltage | 230 V | |
| Replaceable rechargeable battery | no | |
| Operating time | 16 h | |
| Power supply | battery-powered; mains-powered | |
| Torque measuring accuracy | 0.5 % | |
| Display unit | no | |
| Operation | manual | |
| Direction of tightening | right-hand | |
| With printer | no | |
| Type of product | torque tester | |
| Overall length | 200 mm | |
| Overall width | 180 mm | |
| Overall height | 150 mm | |
| Weight | 1 kg | |
| Standard | DIN EN ISO 6789 | |
| Test certificate | yes | |
| Interface | RS232C | |
| With display | yes | |
| Display type | LCD | |
| Display illumination | yes | |
| Storage of measured values | yes |
Identification & Classification
| Article number | 654340 | |
| EAN / GTIN | 5060922231284 | |
| Manufacturer number | 43228 |
Description
Version:
- Robust polyurethane body for fixing to a table or wall.
- Large-format LCD display.
- Pictogram keypad for direct choice of test procedure.
- Interface for connecting an external sensor. When using sensors No. 654350 the measuring range and the calibration parameters are recognised automatically.
- Frequency display for checking of pulsed tools or screwdrivers with slip clutch.
- Target torques with upper and lower tolerance limits can be programmed.
- Serial interface for connection to a printer or PC.
- Power supply: Integral rechargeable battery for approx. 16 hours free-standing use, or 230V mains operation.
- TCS calibration software (freely available after registration at www.norbar.com/Support/Downloads/Software-Download).
Without integral sensor, with connections for 3 external sensors.
Advantage:
Flexible measuring system can be extended to 100,000 Nm. Very easy to use.
Application:
Calibrating torque screwdrivers with adjustment scale or display. Setting and calibrating torque screwdrivers without scale. Setting and calibrating electric or pneumatic screwdrivers with automatic shut-off. Use optional external measurement transducers to calibrate torque wrenches or torque screwdrivers up to 100,000 Nm.
Note:
Not suitable for impact wrenches.