{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Milling insert 30°, HB7720, Pitch: 3mm
Article no.: 217308 3
Article code:
Product details
Technical Data
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | no | |
| Manufacturer’s designation | Fräsplatte 30° | |
| Insert width | 1.75 mm | |
| Blade thickness | 2.85 mm | |
| Insert length | 5.625 mm | |
| Insert version | right-hand | |
| Point angle | 30 degrees | |
| ISO-Code | HOG-P16xx05 | |
| Attachment hole diameter | 5 mm | |
| External diameter | 14 mm | |
| Tool material | Carbide | |
| Machining group | P (steel) | |
| Tool application group | HOG | |
| Cutting media, manufacturer’s designation | HB7720 | |
| Coating | TiAlN | |
| Grade | HB7720 | |
| Insert thickness | 2.85 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | HOG | |
| Interface coding for insert according to ISO TS 13399-60 | HOG-P16xx05 | |
| Insert designation | HOG-P16xx05 | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Standard | works standard | |
| Number of teeth | 3 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | steel (P) | |
| Machining method | spiral milling (thread milling) (FSC) | |
| Finishing / roughing assignment | finishing; roughing | |
| Type of fastening | hole | |
| Chip breaker | yes | |
| Number of potential uses | 3 pcs. | |
| Weight | 3 g | |
| Content | 1 pcs. | |
| Content | single part | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 217308 3 | |
| EAN / GTIN | 4045197854889 | |
| Manufacturer number | 217308 3 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
500
N
400
N
250
P
250
P
180
P
120
P
120
P
100
H
60
H
45
H
35
H
30
M
120
M
120
S
80
K
180
Description
Note:
Please check/calculate the actual groove depth Smax with the selected holder. (D milling insert - d1 holder) / 2.