{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling APKT 1604PDER-43, SC3025
Article no.: 215768 GG
Article code:
Product details
Technical Data
| Number of teeth | 2 pcs. | |
| ISO-Code | APKT 1604PDER-43 | |
| Grade | SC3025 | |
| Tool material | Carbide | |
| Insert thickness T | 4.76 mm | |
| Tolerance Class | K | |
| Coating | CVD | |
| Suitable for material | cast iron (K) | |
| Normal clearance angle (main cutting edge) | 11 degrees | |
| Max. cutting depth ap | 7 mm; 16 mm | |
| Dry machining | suitable | |
| Cooling lubricant | yes | |
| Base form | rhomboidal | |
| Width of insert B | 9.5 mm | |
| Thickness of insert S | 4.76 mm | |
| Insert version | right-hand | |
| Length of cutting edge l | 15.88 mm | |
| Corner angle | 85 degrees | |
| Setting angle | 90 degrees | |
| Normal clearance angle (flat cutting edge) | 15 degrees | |
| Normal clearance angle, main cutting edge | 11 degrees | |
| Cutting depth ap, min. | 0.2 mm | |
| Cutting depth in use | Full slot milling; Side milling | |
| Machining group | K (cast iron) | |
| Cutting media, manufacturer’s designation | SC3025 | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | APKT 1604 | |
| Insert designation | APKT 1604PDER-43 | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Direction of action | right-hand | |
| Type of fastening | hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Number of potential uses | 2 pcs. | |
| Weight | 8 g | |
| Content | single part | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 215768 GG | |
| EAN / GTIN | 4045197512253 | |
| Manufacturer number | 5657163 | |
| Manufacturer/responsible person | Kennametal Deutschland GmbH, Raiffeisenstraße 10, 61191 Rosbach vor der Höhe, Germany, www.kennametal.com |
Application Table
K
280
