{{ name }}
Codice art. {{ combinedCodeWithHighlight }}
Codice materiale:
EAN / GTIN:
Codice del produttore:
Codice articolo:
Inserto per fresatura WNMU 080608 EN-GM, per frese per spallamenti, PR1510
Codice art.: 225626 GG
Codice materiale:
Dettagli prodotto
Dati tecnici
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | WNMU 080608 EN-GM PR1510 | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable | |
| Base form | pentagonal | |
| Wide insert B | 8 mm | |
| Thickness of the insert S | 6,35 mm | |
| Length of cutting insert L | 8 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 8 mm | |
| Height of cutting edge | 6,65 mm | |
| Diameter of the cutting insert d | 14,02 mm | |
| Corner radius R | 0,8 mm | |
| Corner angle | 90 degrees | |
| Rake angle | 13 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Cutting conditions | continuous | |
| ISO-Code | WNMU 080608 EN-GM | |
| Attachment hole diameter | 6,2 mm | |
| Type of chip breaker | GM | |
| Tool material | Carbide | |
| Cutting media, manufacturer’s designation | PR1510 | |
| Coating | Megacoat Nano | |
| Grade | PR1510 | |
| Insert thickness T | 6,35 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | WN0806083N | |
| Interface coding for insert according to ISO TS 13399-60 | WN0806083N | |
| Insert designation | WNMU 080608 EN-GM | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 6 pcs. | |
| Direction of action | neutral | |
| Suitable for material | cast iron (K); non-ferrous materials (N); stainless steel (M); steel (P) | |
| Tolerance Class | M | |
| Machining method | shoulder milling (FEC) | |
| Finishing / roughing assignment | finishing; roughing | |
| Type of fastening | hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Number of potential uses | 6 pcs. | |
| Weight | 12 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2,5 |
Identificazione e classificazione
| Codice articolo | 225626 GG | |
| EAN / GTIN | 4960664648849 | |
| Codice del produttore | TLA09310 | |
| Produttore/persona responsabile | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Deutschland, www.kyocera-unimerco.de |
Tabella dati
S
50
K
180
Descrizione
Esecuzione:
Inserti con rivestimento MEGACOAT con 6 taglienti − tramite esecuzione bilaterale. Grazie all’ampio angolo di spoglia superiore assiale di massimo 13° si riduce notevolmente la forza di taglio.
Uso:
La geometria GM è la prima scelta per le lavorazioni comuni.
Nota:
Valori indicativi per ae = 0,3×D.