{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling WNMU 080608 EN-GM, for indexable milling cutters, PR1510
Article no.: 225626 GG
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | WNMU 080608 EN-GM Typ GG | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable | |
| Base form | pentagonal | |
| Insert width | 8 mm | |
| Blade thickness | 6.35 mm | |
| Insert version | neutral | |
| Cutting edge length | 8 mm | |
| Cutting edge height | 6.65 mm | |
| Insert diameter | 14.02 mm | |
| Corner radius | 0.8 mm | |
| Corner angle | 90 degrees | |
| Rake angle | 13 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Cutting conditions | continuous | |
| ISO-Code | WNMU 080608 EN-GM | |
| Tool material | Carbide | |
| Machining group | K (cast iron); M (stainless steel); P (steel) | |
| Tool application group | Eckfräsen | |
| Cutting media, manufacturer’s designation | PR1510 | |
| Coating | MEGACOAT | |
| Grade | PR1510 | |
| Insert thickness | 6.35 mm | |
| Type of fastening for insert | M (with cyl. hole clamped from above and via the hole) | |
| Interface coding for insert | WNMU 080608 EN-GM | |
| Insert designation | WNMU 080608 EN-GM | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 6 pcs. | |
| Direction of action | neutral | |
| Suitable for material | cast iron (K); stainless steel (M); steel (P) | |
| Tolerance Class | M | |
| Machining method | shoulder milling (FEC) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | continuous | |
| Weight | 12 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 225626 GG | |
| EAN / GTIN | 4960664648849 | |
| Manufacturer number | TLA09310 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
S
50
K
180
Description
Version:
MEGACOAT-coated indexable inserts with 6 edges − due to double-sided version. The high axial rake angle up to a maximum of 13° significantly reduces the cutting force.
Application:
The GM geometry is the first choice for general machining.
Note:
Standard application values for ae = 0.3×D.