{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Pair of cold protection gloves, Glove size: 8
Article no.: 094805 8
Article code:
Product details
Technical Data
| Colour, black | Jet black | |
| Colour, red | Coral red | |
| Part described | Handinnenfläche; Finger; Handrücken; Finger; Handrücken | |
| ESD protected area (EPA) | no | |
| Contents pairs | 1 pair | |
| Cut protection class, EN 388 | C | |
| Version, EN 388 | EN388:2016 | |
| Resistance to abrasion | 4 | |
| Resistance to cuts (Coupe test) | X | |
| Tear propagation resistance | 4 | |
| Resistance to penetration | 2 | |
| Resistance to cuts (TDM) | C | |
| Impact protection | not defined | |
| Convective cold | X | |
| Contact cold | 2 | |
| Waterproof | X | |
| Material of coating, the palms of the hands | nitrile foam | |
| Material of coating, coating on back of hands | Nitrile | |
| Material of lining | non-woven fabric | |
| EN 388 code | 4X42C | |
| Colour | red; black | |
| Type of product | gloves | |
| Area of application | cold protection; cut protection | |
| Glove size | 8 | |
| Scope of application | all-round | |
| Closure | no | |
| Version | five-fingered | |
| Reuse | reusable | |
| Unit | pair | |
| Standard | EN 388; EN 511 | |
| Backing material | polyester | |
| Coating | the palms of the hands; coating on back of hands | |
| Lined | yes | |
| Characteristics | breathable; wet grip | |
| Protection category | II |
Identification & Classification
| Article number | 094805 8 | |
| EAN / GTIN | 4067263162902 | |
| Manufacturer number | 094805 8 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, www.hoffmann-group.com |
Description
Version:
HOLEX cold protection gloves with a pleasant fleece lining. Suitable for wet working environments thanks to the fully coated back of the hand. Very good grip thanks to additional nitrile foam coating on the palm of the hand.
Application:
For windy, cold or wet working conditions.
Standard:
EN 388; EN 511
Note:
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.
Warning:
Intended use
Reasonably foreseeable misuse
- For use in cold working environments, handling small electronic components and performing maintenance, inspection and assembly activities.
- When selecting a cold protection glove, several parameters must be taken into account: ambient temperature, atmospheric conditions, wind speed, health and well-being of the person, effect of other protective clothing worn by the person, duration of exposure, level of activity, dexterity requirements, contact with cold objects, contact with wet or dry objects.
- Optimum protection is obtained only when the area to be protected is completely covered. Where gloves have fastenings, check that these are securely closed. Protective gloves must not be allowed to slip. Select a suitable glove size.
- Protect hands against mechanical risks, abrasion, blisters, and other superficial injuries.
Reasonably foreseeable misuse
- Offer no protection against chemical, microbiological or electrical hazards.
- Do not wear when close to rotating machine parts.
- Combination with other protective equipment must not impair the protective effect and must not hinder the wearer in his activities.