{{ name }}
Art.-nr. {{ combinedCodeWithHighlight }}
Sagsnummer:
EAN/GTIN:
Producentnummer:
Varenr.:
Jordklemme TP 150/80
Art.-nr.: TP-1K
Sagsnummer:
Bemærk venligst den forlængede leveringstid og den begrænsede rådgivning:
Vi bestiller denne vare til dig direkte fra producenten, da den ikke er en del af vores hovedsortiment og derfor ikke er på lager hos os.
InfoProduktdetaljer
Teknisk data
| Produkttype | skruetvinger | |
| Type tvinge | polsvejseklemme | |
| Udhæng maks. | 80 mm | |
| Spændvidde, maks. a; b | 150 mm | |
| Materiale, spændearme | tempergods | |
| Tykkelse, glideskinne | 6 mm | |
| Bredde, glideskinner | 25 mm | |
| Materiale, glideskinne | stål | |
| Gevind, spindel | trapezgevind | |
| Driftstilstand | to-hånds | |
| egnet til | stål | |
| Med trykplade | ja | |
| Bredde, spændflade | 80 mm | |
| Form, bøjlle | C-form | |
| Antal | 1 stk. | |
| Indhold | enkelt del |
Identifikation og klassificering
| Artikelnummer | TP-1K | |
| EAN/GTIN | 4008158015446 | |
| Producentnummer | TP-1K | |
| L-nummer | L80030 88 | |
| Producent/ansvarlig person | BESSEY Tool GmbH & Co. KG, Muehlenwieserstraße 40, 74321 Bietigheim-Bissingen, Deutschland, www.bessey.de |
Betegnelse
Opis:
- With malleable cast iron arms
- Tommy bar with rounded ends for simple transfer of force when clamping
- Grounding connection hole in the upper part
Cecha szcz.:
- Overhead: 80 mm
- Hole Ø: Ø10,5 mm
- Material / surface:
- Upper and lower part made of reinforced malleable cast iron, galvanized
- Hollow profile rail made of steel, cold drawn, galvanized
- Spindle with trapezoidal thread made of steel rolled, burnished
- Steel toggle, galvanized
- Pressure plate made of steel, cold pressed, galvanized
- Rail: 25x6 mm
- Wingspan: 150 mm
- Current: 400 A
Zastosowanie:
- Metal construction
- Locksmith work
- Car body construction
- Earthing using ground clamps
Wskazówka:
- Danger warnings:
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Care instructions:
- Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
- Clean the rails with solvent
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
- Clean the fluting on the rails with a steel brush
- Clean and oil the spindle regularly
- If the lower part slips, turn the grub screw a 1/4 turn further (TG, KRE, KREV only)
- Clean and oil the pressure plate regularly