{{ name }}
Art.-nr. {{ combinedCodeWithHighlight }}
Sagsnummer:
EAN/GTIN:
Producentnummer:
Spændebolt 90° tætnet 50
Art.-nr.: 308795 50
Sagsnummer:
- Spændebolt-standard: MAS 403
Produktdetaljer
Teknisk data
| Passer til konus | 50 | |
| Boreegenskab | med boring | |
| Spændebolt-standard | MAS 403 | |
| Krave-⌀ D | 38 mm | |
| Hoved-⌀ D1 | 23 mm | |
| Samlet længde L | 85 mm | |
| L1 | 45 mm | |
| Gevind M | M24 | |
| Maks. tilspændingsmoment | 150 Nm | |
| Passer til konusdorn med farvekode | SK 50 | |
| Nøglestørrelse | 30 mm | |
| Produkttype | Antræksbolte |
Identifikationsnumre og klassifikationer
| Artikelnummer | 308795 50 | |
| EAN/GTIN | 4045197532794 |
Betegnelse
Description:
The toolholder is securely pulled into the spindle by the spindle’s clamping gripper using the pull stud. Pull studs come in different versions. They are an important link between the machine and tool. Stringent requirements apply for the accuracy, strength and reliability of pull studs.
Application:
For tools with taper shanks see also JIS B 6339 (MAS-BT) / ISO 7388-2.
Note:
Sealed − with O-ring.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.