{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling X.LT..ER-D41, for high feed rate indexable face mills, X400
Article no.: 221925 16
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | 7792VXE IC16 INSERT X-GRADE | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable | |
| Base form | square | |
| Insert width | 14.5 mm | |
| Blade thickness | 5.56 mm | |
| Insert length | 14.5 mm | |
| Insert version | neutral | |
| Cutting edge length | 14.5 mm | |
| Cutting edge height | 5.56 mm | |
| Insert diameter | 16.8 mm | |
| Setting angle | 20 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| ISO-Code | XELW160512-SR-DD | |
| Tool material | Carbide | |
| Machining group | K (cast iron); M (stainless steel); N (non-ferrous metals); P (steel) | |
| Tool application group | HPC | |
| Cutting media, manufacturer’s designation | X400 | |
| Coating | PVD | |
| Grade | X400 | |
| Interface coding for insert | XELW160512-SR-DD | |
| Insert designation | XELW160512-SR-DD | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Number of teeth | 4 pcs. | |
| Direction of action | neutral | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Number of potential uses | 4 pcs. | |
| Weight | 12 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 221925 16 | |
| EAN / GTIN | 4059782506107 | |
| Manufacturer number | 5653967 | |
| Manufacturer/responsible person | Kennametal Deutschland GmbH, Raiffeisenstraße 10, 61191 Rosbach vor der Höhe, Germany, www.kennametal.com |
Application Table
P
260
P
240
P
200
P
150
P
110
Description
Version:
Particularly thick indexable inserts with ground wiper chamfer.
Note:
Standard application values for ae = 0.3×D.