{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
GARANT Master Steel Speed solid carbide drill, plain shank DIN 6535 HA, TiAlN, ⌀ DC h7: 3mm
Article no.: 123025 3
Copy
Article code:
Copy
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Version: 8×D
- Tolerance nominal ⌀: h7
- Number of cutting edges Z: 2
Product details
Technical Data
| Series | Master Steel | |
| Nominal ⌀ DC | 3 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Version | 8×D | |
| Tolerance nominal ⌀ | h7 | |
| Number of cutting edges Z | 2 | |
| Point angle | 135 degrees | |
| recommended maximum drilling depth L2 | 29.5 mm | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | yes, with 25 bar | |
| Machining strategy | HPC | |
| Semi-Standard | yes | |
| Flute length Lc | 34 mm | |
| Overall length L | 72 mm | |
| Shank ⌀ Ds | 6 mm | |
| Feed f in steel < 1100 N/mm2 | 0.09 mm/rev. | |
| Colour ring | green | |
| Type of product | Jobber drill |
Identification & Classification
| Article number |
123025 3
Copy |
|
| EAN / GTIN |
4045197838810
Copy |
|
| Manufacturer number |
123025 3
Copy |
|
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
suitable for / [m/min]
P
ISO code:
195
suitable for / [m/min]
P
ISO code:
150
suitable for / [m/min]
P
ISO code:
135
suitable for / [m/min]
P
ISO code:
125
suitable for / [m/min]
P
ISO code:
80
suitable for / [m/min]
M
ISO code:
65
suitable for / [m/min]
K
ISO code:
120
suitable for / [m/min]
K
ISO code:
115
suitable for / [m/min]
suitable for / [m/min]
suitable for / [m/min]
Description
Version:
Developed for use with very high cutting speeds. Outstandingly suitable for machines with low installed power and high speeds.
A slim chisel point and the special arrangement of the 4 guide chamfers ensure high positioning and alignment accuracy. Optimised micro-geometry for increased working life and performance capability.
- Clear reduction in cutting forces due to special cutter geometry.
- Coating for best wear resistance even at high process temperatures.
- Polished flutes for good chip clearance.
A slim chisel point and the special arrangement of the 4 guide chamfers ensure high positioning and alignment accuracy. Optimised micro-geometry for increased working life and performance capability.