{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Telescopic drywall support ST 1250
Article no.: ST125
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Technical Data
| Part described | base area | |
| Quality and test seal | Geprüfte Sicherheit | |
| Material | Plastic | |
| Material of the stand | steel | |
| Inclination adjustable | 45 degrees | |
| Characteristics | non-slip | |
| Min. height adjustment range | 750 mm | |
| Max. height adjustment range | 1,250 mm | |
| Type of product | Support | |
| Max. load capacity | 150 kg | |
| Height adjustable | yes | |
| Usable height | 1,250 mm | |
| Mobile | no |
Identification & Classification
| Article number | ST125 | |
| EAN / GTIN | 4008158031590 | |
| Manufacturer number | ST125 | |
| L-Number | L80030 315 | |
| Manufacturer/responsible person | BESSEY Tool GmbH & Co. KG, Muehlenwieserstraße 40, 74321 Bietigheim-Bissingen, Germany, www.bessey.de |
Description
Description:
- Resilient up to a maximum of 150 kg when the telescopic rod is fully retracted
- Stable construction due to special steel pipes and anti-slip PVC contact surfaces (8,5 x 6,5 cm)
- Application also on slopes due to continuously swivelable contact surfaces of -45° to +45°
- Easy, safe handling due to a telescoping and locking inner pipe as well as an outer pipe that can be turned by the foam grip
- GS-certified for quality and safety
Feature:
- Load limit at max. Pull-out length: 60 kg
- Load limit at min. Pull-out length: 150 kg
- Material / surface:
- Upper and lower part made of reinforced PA6 plastic
- Steel tube, coated
- Lever made of reinforced PA6 plastic
- Plastic protective caps
- Travel: 750-1250 mm
Advantage:
Secure hold
- Resilient and anti-slip, the support guarantees secure holding, even on sensitive surfaces:
- due to special steel pipes ensures a max load of 150 kg can be applied (dependent upon the size of support and length applied)
- due to additional locking of the release button
- due to rubber PVC contact surfaces top and bottom
- The support can be used quickly:
- due to the fixing in just two steps: The rough pre-setting is carried out using the telescoping and quickly locking inner pipe
- due to additional locking of the release button
- due to special steel pipes ensures a max load of 150 kg can be applied (dependent upon the size of support and length applied)
Application:
- Interior fittings
- Shell construction
- DIY
- Staircase construction
- Dry construction
- Carpentry and woodwork
- Fixes and supports during dry construction
- Single-worker assembly
Note:
- Danger warnings:
- Read and observe the operating instructions.
- The specified load limits must not be exceeded.
- You may only use the telescopic drywall support on level and clean surfaces.
- You must not apply lateral loads to the telescopic drywall support.
- The telescopic drywall support may only be tensioned by hand without additional aids.
- You may only use original spare parts.
- Protect yourself with safety goggles and a safety helmet.
- Care instructions:
- Clean the rails with solvent
- Clean and oil the spindle regularly