{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Carbide-tipped multi-purpose drill, 1/4 inch (E 6.3), ⌀: 3mm
Article no.: 787001 3
Article code:
Product details
Technical Data
| Interface position | on the machine | |
| Holder type | bit hexagon shank | |
| Size of bit hex according to DIN 3126 | E 6,3 | |
| Cutter diameter, min. Dc min. | 3 mm | |
| Configurable | no | |
| Number of teeth Z | 2 | |
| Twist direction | right-hand | |
| Angle, 1st step | 118 degrees | |
| Tool material | Carbide | |
| Coating | uncoated | |
| Interface | joint 1 | |
| Usable length L1 | 45 mm | |
| Overall length L | 90 mm | |
| Cutting direction | right-hand cutting | |
| Machining method | drilling into solid material (BVB) | |
| Type of product | indexable drill | |
| Content | single part |
Identification & Classification
| Article number | 787001 3 | |
| EAN / GTIN | 4058546287191 | |
| Manufacturer number | 4932471091 | |
| Manufacturer/responsible person | Techtronic Industries Central Europe GmbH, Walder Straße 53, 40724 Hilden, Germany, www.milwaukeetool.de |
Description
Version:
Carbide tip with ground point and multi-purpose cutter angle. The centrally ground chisel edge ensures accurate spot drilling also on hard surfaces. Shank of annealed special steel.
Application:
For drilling various materials, in a single operation:
- Bricks, porous concrete, lightweight materials, plastics.
- Tiles, ceramics, marble, glass
- Reinforcing bars in concrete.
Note:
- Caution: only for rotary use (without hammer action!)
- Faster drilling and more holes per battery charge than with hammer drill bits.