{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Electrician’s screwdriver for Phillips, reduced blade ⌀, with Kraftform handle VDE fully insulated, Cross-head size: 1
Article no.: 668620 1
Article code:
Click to enlarge image
Click to enlarge image
Insulation ⌀ matches the blade ⌀ near the tip of the blade.
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Offers
Product details
Technical Data
| Tested up to | 1,000 V | |
| Manufacturer’s designation | 162 iS | |
| Quality and test seal | VDE | |
| ESD protected area (EPA) | no | |
| Colour | yellow; red | |
| Version | straight | |
| Hexagon collar for wrench assistance | yes | |
| Suitable for voltage testing | yes | |
| Maximum test voltage | 1,000 | |
| Blade length | 80 mm | |
| Handle properties | ergonomic; non-slip | |
| Type of handle | standard handle | |
| Handle length | 98 mm | |
| Size of drive output, for Phillips screws (PH) | PH1 | |
| Type of product | screwdriver | |
| Material | special steel / special alloy | |
| Surface | phosphated | |
| Standard | DIN EN 60900; VDE 0682-201 | |
| Overall length | 178 mm | |
| Set | no | |
| Drive | handle | |
| Output drive | for Phillips screws (PH) | |
| Content | single part |
Identification & Classification
| Article number | 668620 1 | |
| EAN / GTIN | 4013288160140 | |
| Manufacturer number | 05006450001 | |
| Manufacturer/responsible person | Wera Werkzeuge GmbH, Korzerter Straße 21-25, 42349 Wuppertal, Germany, www.wera.de |
Description
Version:
Handle and blade fully insulated up to 1000 V to DIN EN IEC 60900 / VDE 0682-201. Each of these screwdrivers is individually tested in a water bath for insulation breakdown under high voltage.
Kraftform handle made of impact resistant plastic with integral soft zones facilitates torque transmission and thus protects hand and arm.
Blade made of high-alloy special steel, zinc phosphated.
Reduced blade ⌀ with integral protective insulation for deep-lying screws of spring elements (blade ⌀ = insulation ⌀ near the tip of the blade).
Kraftform handle made of impact resistant plastic with integral soft zones facilitates torque transmission and thus protects hand and arm.
Blade made of high-alloy special steel, zinc phosphated.
Reduced blade ⌀ with integral protective insulation for deep-lying screws of spring elements (blade ⌀ = insulation ⌀ near the tip of the blade).
Application:
For use at voltages up to 1000 V.