{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Torque screwdriver without scale, to take interchangeable blades, maximum torque: 200cNm
Article no.: 659958 200
Article code:
Click to enlarge image
Click to enlarge image
6 mm blade
Click to enlarge image
Click to enlarge image
Labelling field for the customer’s torque setting.
Click to enlarge image
Torque setting under the cover flap.
Product details
Technical Data
| Colour | red; black | |
| Suitable interchangeable blade diameters | 6 mm | |
| Slipper function | yes | |
| Adjustable trigger value | preset | |
| Unit of measure for torque | cNm | |
| Set torque | 100 | |
| Setting the trigger value | without setting scale (requires torque analyser) | |
| Data can be recorded | no | |
| Trigger principle | mechanical short travel release | |
| Trigger signal | acoustic; haptic | |
| Feedback | triggering | |
| Content | single part | |
| Can be calibrated | yes | |
| Type of product | torque screwdriver | |
| Direction of tightening | right-hand | |
| Shape of connection | exchangeable blade | |
| Measurement technology | mechanical | |
| Measuring functions | torque | |
| DIsplay | nothing displayed | |
| Torque range (min.) | 0.4 Nm | |
| Torque range (max.) | 2 Nm | |
| Torque accuracy clockwise | 6 % | |
| Manufacturer’s test certificate | yes | |
| Standard | DIN EN ISO 6789 | |
| Overall length | 124 mm |
Identification & Classification
| Article number | 659958 200 | |
| EAN / GTIN | 7610733291731 | |
| Manufacturer number | 8314.A 1.0 NM |
Description
Version:
Power grip with non-allergenic elastomer coating allows transmission of the required torque with no problems even with wet or oily hands. On reaching the set torque value, the screwdriver can be felt and heard to trigger and is then again immediately ready for use. The release torque is higher than the tightening torque (overload protection).
The desired torque can be set by stepless adjustment using a torque analyser (No. 654300 − 654460) and a 5 AF hexagon screwdriver (not supplied).
The desired torque can be set by stepless adjustment using a torque analyser (No. 654300 − 654460) and a 5 AF hexagon screwdriver (not supplied).
Standard:
Tested to DIN EN ISO 6789.
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.