{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
PFERD TOOLS HSS conical and deburring countersink 90 ° dia. 16.5 mm shank dia. 10 mm DIN 335 C HICOAT coated
Article no.: 4007220168356
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Technical Data
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | no | |
| Dry machining | suitable | |
| Cutter diameter, min. | 16.5 mm | |
| Configurable | no | |
| Tolerance of cutter diameter | manufacturer tolerance | |
| Angle, 1st step | 90 degrees | |
| Product designation (type) | K | |
| Tool material | HSS | |
| Cutting media, manufacturer’s designation | HSS | |
| Coating | coated | |
| Overall length | 60 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 335 C | |
| Machining method | subland drilling | |
| Type of product | countersink |
Identification & Classification
| Article number | 4007220168356 | |
| EAN / GTIN | 4007220168356 | |
| Manufacturer number | 25202146 | |
| L-Number | L51140 902 | |
| Manufacturer/responsible person | August Rueggeberg GmbH & Co. KG, Hauptstraße 13, 51709 Marienheide, Germany, www.pferd.com |
Description
Version:
- HC-FEP
Description:
- Conical countersinks from PFERD TOOLS are characterized by their particularly sharp right-hand flutes that are able to achieve very good results, even at low cutting speeds.
- In addition, conical countersinks with a HICOAT coating provide good high-temperature hardness and resistance to oxidation.
- They can therefore also be used on hard materials without the addition of coolants.
- High-performance countersink tools with a countersink angle of 90° for countersinking 90° screws for particularly tough and hard materials such as alloyed and high-strength steel and stainless steel.
- To ensure reliable torque transmission, conical countersinks have a three-surface shaft from a countersink diameter of 28 mm.
- Thanks to the HICOAT coating HC-FEP, they have high hardness and wear resistance.
- They are very temperature resistant and have a particularly long tool life.
- They can also be used in a higher cutting speed range and without coolants and lubricants.
Feature:
- RPM from, grey cast iron, white cast iron: 190 RPM
- RPM from, rust and acid-resistant steels: 190 RPM
- RPM from, soft non-ferrous metals: 290 RPM
- RPM from, steels up to 700 N/mm²: 290 RPM
- RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP): 190 RPM
- RPM to, grey cast iron, white cast iron: 190 RPM
- RPM to, rust and acid-resistant steels: 290 RPM
- RPM to, soft non-ferrous metals: 380 RPM
- RPM to, steels up to 700 N/mm²: 380 RPM
- RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP): 290 RPM
- Version: HC-FEP
- Diameter: 16.5 mm
- Dia. shank, metric: 10 mm
- Angle: 90 °
- Length, total: 60 mm
Application:
- Recommendations for use: Particularly well suited for producing countersinks for 90° screws.
- Applications: Countersinking
- Drive types: Column drill; Tool machine; Power drill; Automated centres
Material:
- Materials that can be worked:
- Aluminium
- Annealed cast iron
- Black annealed cast iron (GTS, GJMB)
- Brass
- Bronze
- Case-hardened steels
- Cast iron
- Chipboard
- Cobalt-based alloys
- Copper
- Thermosetting plastics
- Elastomers
- Fibre-reinforced thermosetting plastics (GRP, CRP)
- Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content ≤ 40 %
- Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 %
- Grey/nodular cast iron (GG/GJL, GGG/GJS)
- Hard aluminium alloys
- Hard non-ferrous metal
- Nickel-based alloys (e.g. Inconell and Hastelloy)
- Nickel or titanium-based superalloys
- Other non-ferrous metals
- Other
- Plastics
- Soft aluminium alloys
- Soft non-ferrous metal
- Soft titanium alloys (tensile strength 500 N/mm²)
- Soft wood
- Stainless steel (INOX)
- Steel
- Steel, cast steel
- Steels up to 1,200 N/mm² (< 38 HRC)
- Steels over 700 N/mm² (> 220 HB)
- Steels up to 700 N/mm² (< 220 HB)
- Thermoplastics
- Titanium
- Titanium alloys
- Tool steels
- Tough aluminium alloys
- White annealed cast iron (GTW, GJMW)
- Wood
- Zinc
- Materials that can be worked: Aluminium; Annealed cast iron; Black annealed cast iron (GTS, GJMB); Brass; Bronze; Case-hardened steels; Cast iron; Chipboard; Cobalt-based alloys; Copper; Thermosetting plastics; Elastomers; Fibre-reinforced thermosetting plastics (GRP, CRP); Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content ≤ 40 %; Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 %; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hard aluminium alloys; Hard non-ferrous metal; Nickel-based alloys (e.g. Inconell and Hastelloy); Nickel or titanium-based superalloys; Other non-ferrous metals; Other; Plastics; Soft aluminium alloys; Soft non-ferrous metal; Soft titanium alloys (tensile strength 500 N/mm²); Soft wood; Stainless steel (INOX); Steel; Steel, cast steel; Steels up to 1,200 N/mm² (< 38 HRC); Steels over 700 N/mm² (> 220 HB); Steels up to 700 N/mm² (< 220 HB); Thermoplastics; Titanium; Titanium alloys; Tool steels; Tough aluminium alloys; White annealed cast iron (GTW, GJMW); Wood; Zinc