{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
NC high pressure vice version LC, Type: 125
Article no.: 360510 125
Article code:
Product details
Technical Data
| Clamping range quick adjustment | yes | |
| Max. overall length | 446 mm | |
| Base body length | 398 mm | |
| Base body height | 100 mm | |
| Jaw height | 39.5 mm | |
| Interchangeable jaws | yes | |
| Clamping force selection | maximum clamping force | |
| Clamping force | 40 kN | |
| With power intensifier | no | |
| Tenon slots | longitudinal slot; cross-slot | |
| Transverse slot width | 20 mm | |
| Width of longitudinal groove | 20 mm | |
| With bore | yes | |
| Hole diameter | 25 mm | |
| Pitch | 200 | |
| With thread | yes | |
| Thread size | M10 | |
| Can be swivelled | no | |
| Version | zero-point clamping system | |
| With swivel base | no | |
| Weight | 34 kg | |
| Material | Spheroidal graphite iron | |
| Surface | ground; nitrided | |
| Accuracy | 0.02 mm | |
| Type of product | machine vice |
Identification & Classification
| Article number | 360510 125 | |
| EAN / GTIN | 4250364401500 | |
| Manufacturer number | 360510 125 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- Compact size; optimum ratio between jaw span and overall length. Clamping force can be checked visually by the 4 ring marks. Maximum clamping pressure reproducible using integral fixed stop.
- Particularly rigid base body made of spheroidal graphite iron, top and bottom faces; pairing accuracy 0.02 mm.
- Supplied with 25H6 M10 holes for zero point clamping systems, pitch 200 mm.
Feature:
- Click quick-change system for parallel inserts / jaws. Short set-up times and high flexibility.
- Fully enclosed and nitrided spindle (increased operational reliability, optimised swarf protection, minimised cleaning requirement).
Application:
Universal clamping system for machining centres.
Supplied with:
2 stepped jaws, 1 crank handle, 4 steplessly adjustable clamps, and 1 hexagon L-wrench.
Optional extras:
- For tenon and Tee nut set see No. 360530.
- See No. 360555; 352650 and 360800 for spare component backstop / spare crank handle.
- See No. 360850 for hand crank extension.
- See also No. 361380 − 361770 and 362390 − 362600 for other jaws.
- For spare stepped jaws see No. 361400; 361420 and 361295; 361296.
- Clamping stud No. 360025.
- Adapter plates for jaw quick-change system Xtrix No. 361293 and 361294 size 125.
- Adapter plates No. 361297 and 361298 size 125.
Note:
Warning:
Intended use
Reasonably foreseeable misuse
- The device must only be used for clamping solid workpieces.
Reasonably foreseeable misuse
- Elastic workpieces must not be clamped using the device.
- Clamping by turning the crank anti-clockwise is not permitted.