{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Face driver with Morse taper, Morse taper (MK): 4
Article no.: 327400 4
Article code:
Product details
Technical Data
| Head diameter | 42 mm | |
| Type of centring point | fixed | |
| Point angle | 60 degrees | |
| Largest point diameter | 5 mm | |
| Clamping diameter | 17 mm | |
| Min. working range | 19 mm | |
| Max. working range | 34 mm | |
| Mounting machine-side | MT4 | |
| With push-off thread | no | |
| With shock absorbing | no | |
| Usable length | 62 mm | |
| Max. workpiece weight | 50 kg | |
| Direction of action | left-hand; right-hand | |
| Replaceable centring points included | yes | |
| Use | turn-milling; turning | |
| Type of product | face driver |
Identification & Classification
| Article number | 327400 4 | |
| EAN / GTIN | 4062406764586 | |
| Manufacturer number | 327400 4 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- Tip angle 60°, clamping ⌀ 17 mm – 54 mm.
- Clockwise and anti-clockwise rotation.
- Outstandingly suitable for use on lathes and when hobbing.
Application:
For mounting in the headstock taper of the lathe.
Suitable for:
Supplied with:
Optional extras:
Note:
Suitable taper sleeves for adapting in lathe chucks available on request.
Warning:
Intended use
Reasonably foreseeable misuse
- Face driver for face clamping workpieces with a maximum material hardness of 35 HRc. Intended for industrial use on a lathe.
Reasonably foreseeable misuse
- Only to be used in line with the intended use.
- Do not use in explosion hazard areas.
- Do not make any unauthorised modifications.
- Not for use where there is exposure to intense heat, direct sunlight, naked flames or liquids.
- Use only when it is technically in good condition and safe to operate.
- Not for use in areas where high concentrations of dust, flammable gases, vapours or solvents are present.
- Do not subject it to blows, impacts or heavy loads.