{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Lightweight revolving lathe centre, Morse taper: 3
Article no.: 320652 3
Article code:
Product details
Technical Data
| Overall length L | 157.5 mm | |
| Head diameter D | 49 mm | |
| Type of centring point | tracking | |
| Point angle α | 60 degrees | |
| Largest point diameter D1 | 25 mm | |
| Point length L3 | 29.5 mm | |
| Usable length L2 | 79 mm | |
| Mounting machine-side | MK3 | |
| With clamping faces | no | |
| With carbide tip | yes | |
| With shock absorbing | no | |
| Max. workpiece weight | 500 kg | |
| Maximum speed | 5,000 min-1 | |
| Maximum radial run-out | 0.006 mm | |
| Use | turning | |
| Weight | 0.8 kg | |
| Type of product | centring drill |
Identification & Classification
| Article number | 320652 3 | |
| EAN / GTIN | 4062406200282 | |
| Manufacturer number | 320652 3 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- Tip angle 60°.
- Lightweight version with slim body.
- Precision roller bearings for high concentricity.
- Maintenance-free due to lifetime lubrication.
- Special seal prevents ingress of dirt and coolant.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
Mainly used for machining small and smallest components on all types of lathes.