{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Axial milling cutter spigot VARIA VX4, VX4, Spigot ⌀ d1: 16mm
Article no.: 319838 16
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | no | |
| Series | VARIA | |
| Manufacturer’s designation | Axial-Fräsdornhalter VARIA VX4 | |
| Interface position | on the machine; on the workpiece | |
| Holder type | milling arbor mounting | |
| Interface coding | EWC00300215; FDA01600200 | |
| Holder shape | with longitudinal and cross-slot | |
| Holder version | metric | |
| Holder size, metric | 16 mm | |
| Type of mounting | spigot | |
| Interface on machine side | VX4 | |
| Milling cutter spigot length L3; L4 | 25 mm | |
| External diameter, on the tool side D | 34 mm | |
| Format | short | |
| Tightening torque | 5.7 Nm | |
| Mandrel diameter d1 | 16 mm | |
| Interface | joint 1; joint 2 | |
| Type of product | face mill arbor | |
| Overall length L | 75.1 mm | |
| Through-coolant available | yes | |
| Content | 1 pcs. | |
| Collar width | 4 mm |
Identification & Classification
| Article number | 319838 16 | |
| EAN / GTIN | 2050001743572 | |
| Manufacturer number | S05424 | |
| Manufacturer/responsible person | EWS Weigele GmbH & Co. KG, Maybachstraße 1, 73066 Uhingen, Germany, www.ews-tools.de |
Description
Version:
VX − Three-point clamping of the integral segment ring, free of transverse forces. Polygon torque resistance up to 200 Nm.
Advantage:
- Quick change using a single clamping point, therefore tool change without risk of injury.
- Cutter tools lie pre-set at the machine.
- Compact design - low unit costs.
Application:
With drive keyway. For milling cutters with keyways and cross slots.
Note:
Through coolant supply on request.
Maximum tightening torque for VX3 and VX4 is 5.7 Nm, which can be achieved using the appropriate torque screwdriver No. 211750 size 5.7. Maximum tightening torque for V5 is 10 Nm. When releasing the deposits, do not travel beyond the stop. We recommend the EWS Clean and cleaning set for cleaning the Varia toolholders and replaceable inserts.
Maximum tightening torque for VX3 and VX4 is 5.7 Nm, which can be achieved using the appropriate torque screwdriver No. 211750 size 5.7. Maximum tightening torque for V5 is 10 Nm. When releasing the deposits, do not travel beyond the stop. We recommend the EWS Clean and cleaning set for cleaning the Varia toolholders and replaceable inserts.