{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Soft top jaw set, 3 pieces, for chuck type: 200
Article no.: 313315 200
Article code:
Product details
Technical Data
| Jaw width B | 22 mm | |
| Jaw height H | 40 mm | |
| Jaw length L | 105 mm | |
| For lathe chuck diameter | 200 mm | |
| Clamping face | smooth | |
| Suitable for interchangeable inserts | no | |
| With rib | yes | |
| With groove | yes | |
| Slot width B2 | 10 mm | |
| Function | fixed | |
| Type of fastening | screwing | |
| Hole spacing to one other A1 | 40 mm | |
| incl. screws | no | |
| Content | 3 pcs. | |
| Type of product | lathe chuck jaws | |
| Material | steel | |
| Content | pieces |
Identification & Classification
| Article number | 313315 200 | |
| EAN / GTIN | 4062406699123 | |
| Manufacturer number | 313315 200 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Unstepped, for boring out to individual clamping ⌀. Milled location faces, not burnished.
Application:
For fitting to hardened base jaws. For clamping irregularly shaped or already machined components which have to be protected against damage. The jaws are machined according to the contours of the component.
As the jaws can be changed or adjusted to the required diameter in just a few seconds, it is useful to have several jaw sets on hand ready for use at the machine. This minimises set-up times. The jaw units consist for example of several sets of base jaws with soft top jaws, which can be machined out to the required diameters. This rationalisation method is not only necessary for NC machines but also important for every lathe type.
As the jaws can be changed or adjusted to the required diameter in just a few seconds, it is useful to have several jaw sets on hand ready for use at the machine. This minimises set-up times. The jaw units consist for example of several sets of base jaws with soft top jaws, which can be machined out to the required diameters. This rationalisation method is not only necessary for NC machines but also important for every lathe type.
Material:
Quality product made of 16MnCr5.
Suitable for:
Schunk self-centring chucks No. 313115; 313117; 313135; 313137, Röhm self-centring chucks Duro No. 313120; 313140 and other self-centring chuck systems.
Note:
Size 400 also suitable for chuck size 500.
Aluminium top jaws on request.
Aluminium top jaws on request.