{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
ER collet, ER 25, Nominal clamping ⌀ d: 3mm
Article no.: 308963 3
Article code:
Product details
Technical Data
| Manufacturer’s designation | ER-Spannzange | |
| Interface position | on the machine | |
| Holder type | collet taper | |
| Holder | ER 25 | |
| Clamping diameter D1 | 3 mm | |
| Min. clamping diameter D1 min | 2 mm | |
| Max. clamping diameter D1 max | 3 mm | |
| External diameter D | 26 mm | |
| Length of collet L | 34 mm | |
| Standard | DIN 6499 | |
| Surface | ground; hardened; polished | |
| Clamping profile | round | |
| Concentricity ≤ | 10 µm | |
| Interface | joint 1 | |
| Type of product | collet | |
| Content | single part |
Identification & Classification
| Article number | 308963 3 | |
| EAN / GTIN | 4069515024273 | |
| Manufacturer number | 308963 3 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Through hardened and ground. Polished.
Note:
The collet clamping ⌀ range is always up to 1 mm less than nominal, e.g. ⌀ 10 − 9 mm, except for ⌀ 1, 1.5 and 2 (where it is only 0.5 mm).
Collets ER16, ER25 and ER32 without a seal also available in inch sizes via the eShop.
Collets ER16, ER25 and ER32 without a seal also available in inch sizes via the eShop.