{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Precision ER collet chuck CENTRO P, HSK-A 100 A = 160, Type CP for ER: 16
Article no.: 305960 16
Article code:
Find similar products here:
Product details
Identification & Classification
| Article number | 305960 16 | |
| Manufacturer number | 44328001600 | |
| Manufacturer/responsible person | Eugen Fahrion GmbH & Co. KG Präzisions-Spannwerkze, Forststraße 54, 73667 Kaisersbach, Germany, www.fahrion.de |
Description
Version:
- Ground externally and internally. With Balluffchip bore.
- Run-out and repetition accuracy 3 µm at 3×D, maximum 50 mm.
- Very high clamping forces due to the collet fully seated in the chuck and coated clamping nut.
- Vibration damping due to the element collet and mass of the chuck.
- Alternatively without seals, with ER clamping nut CP No. 309655 or sealed system with ER clamping nut CP for HP sealing rings No. 309665 in conjunction with HP sealing rings No.309666 − 309668 (for internal coolant supply or as a dirt trap!).
Advantage:
Patented optimum seating of the collet, double guides, trapezoidal thread and low-friction coated clamping nut amalgamate when clamped into a sturdy unit, thus ensuring a very high degree of rigidity and precision.
Application:
For high precision clamping of tools with plain shanks.
Supplied with:
Without clamping nut and sealing rings.
Optional extras:
Precision ER collets for HP No. 309368 − 309381, and for taps No. 309402; 309419 (not Holex). ER clamping nuts CP No. 309655; 309665. HP sealing rings No. 309666 − 309668. CP roller bearing wrenches No. 309754; 309756.
Note:
- CP chuck clamps only nominal ⌀ up to shank ⌀ tolerance h10.
- Use in combination with Fahrion collets.