{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Standard keyway broaching toolholder ⌀ DS 25 mm, from slot width m: 12mm
Article no.: 290355 12
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Cooling lubricant | yes | |
| Type of product | keyway broaching and profile slotting tool | |
| Diameter of blade carrier | 30 mm | |
| Diameter of minimum pre-drill | 32.56 mm | |
| Diameter of shaft | 25 mm | |
| Length of shank | 90 mm | |
| Blade carrier radius | 15 mm | |
| Gauge length | 104 mm | |
| Centre-line offset | 16.5 mm | |
| Suitable for slot width | 12 mm | |
| Content | single part |
Identification & Classification
| Article number | 290355 12 | |
| EAN / GTIN | 4045197881151 | |
| Manufacturer number | 290355 12 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Attention:
Always use the minimum pre-drill ⌀ to match the slot width (e.g. for slot width 14 mm, minimum pre-drill ⌀ = 38.22 mm).
Note:
- Individual holder sizes are for different slot widths. In such cases, where possible, always use the optimum combination of holder and cutting insert (identical size) for maximum stability.
- For lathes without Y-axis, please use eccentric bush No. 290391 − 290393 for exact setting of the Y-coordinate.
- For machining centres, use the pull-up aid No. 290397 and a dial indicator to check the spindle orientation.