{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling BDMT 170408 ER-JS, for indexable milling cutters, CA6535
Article no.: 227565 S
Article code:
Product details
Technical Data
| Machining method | shoulder milling (FEC) | |
| Number of teeth | 2 pcs. | |
| ISO-Code | BDMT 170408 ER-JS | |
| Grade | CA6535 | |
| Tool material | Carbide | |
| Corner radius R | 0.8 mm | |
| Insert thickness T | 4.76 mm | |
| Tolerance Class | M | |
| Coating | CVD | |
| Suitable for material | Titan; stainless steel (M) | |
| Normal clearance angle (main cutting edge) | 15 degrees | |
| Wet minimum | suitable only under restricted conditions | |
| Max. cutting depth ap | 3 mm; 9 mm | |
| Wet maximum | suitable only under restricted conditions | |
| Dry machining | suitable | |
| Air | suitable | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | BDMT 170408 ER-JS | |
| Base form | rhomboidal | |
| Width of insert B | 9.6 mm | |
| Thickness of insert S | 4.76 mm | |
| Insert version | right-hand | |
| Length of cutting edge l | 17 mm | |
| Height of cutting edge | 4.9 mm | |
| Diameter of insert d | 9.6 mm | |
| Corner angle | 82 degrees | |
| Setting angle | 90 degrees | |
| Attachment hole diameter | 4.4 mm | |
| Cutting depth ap, min. | 0.14 mm | |
| Cutting depth in use | Full slot milling; Side milling | |
| Feed rate per tooth min. fz | 0.07 mm | |
| Feed rate per tooth max. fz | 0.13 mm | |
| Machining group | M (stainless steel); S (difficult-to-machine materials) | |
| Cutting media, manufacturer’s designation | CA6535 | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | BDMT 1704 | |
| Interface coding for insert according to ISO TS 13399-60 | BDMT1704 | |
| Insert designation | BDMT 170408 ER-JS | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Direction of action | right-hand | |
| Type of fastening | hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Number of potential uses | 2 pcs. | |
| Content | single part | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 227565 S | |
| EAN / GTIN | 4960664686223 | |
| Manufacturer number | TMA00339 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
M
240
M
220
S
30
Description
Note:
Standard application values for ae = 0.3×D.
Exactly 90° up to ap = 9 mm.
Exactly 90° up to ap = 9 mm.