{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling SPMT 1806 EDSR-NB2T, for face mills / end mills, PR1810
Article no.: 224030 GG
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Manufacturer’s designation | SPMT 1806 EDSR-NB2T | |
| Base form | square | |
| Insert width | 18 mm | |
| Blade thickness | 6.35 mm | |
| Insert length | 18 mm | |
| Insert version | right-hand | |
| Cutting edge length | 18 mm | |
| Insert diameter | 18 mm | |
| Corner radius | 1.2 mm | |
| Corner chamfer length | 3.1 mm | |
| Corner chamfer angle | 75 degrees | |
| Corner angle | 90 degrees | |
| Rake face chamfer width | 0 mm | |
| Rake face chamfer angle | 0 degrees | |
| Rake angle | 90 degrees | |
| Setting angle | 11 degrees | |
| Normal clearance angle (main cutting edge) | 11 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| ISO-Code | SPMT 1806 EDSR-NB2T | |
| Attachment hole diameter | 6.8 mm | |
| Wiper length axial | 18 mm | |
| Tool material | Carbide | |
| Machining group | S (difficult-to-machine materials) | |
| Tool application group | HOG | |
| Cutting media, manufacturer’s designation | PR1810 | |
| Coating | Megacoat Nano | |
| Insert thickness | 6.35 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | SP1806123R | |
| Interface coding for insert according to ISO TS 13399-60 | SP1806123R | |
| Insert designation | SPMT1806EDER | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 4 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | heat-resistant super-alloys (S) | |
| Tolerance Class | M | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Roughing | |
| Type of fastening | Hole | |
| Chip breaker | no | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | interrupted | |
| Number of potential uses | 4 pcs. | |
| Weight | 19 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 224030 GG | |
| EAN / GTIN | 4960664027590 | |
| Manufacturer number | SPMT1806EDSR-NB2TPR1810 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
K
180
Description
Version:
Special indexable insert geometry ensures reduced cutting forces and improved chip breaking. All types with wiper cutters for high feed rates.
Application:
NB2T / NB3T: Ideal for interrupted cutting, high cutting speeds and high feed rates.
Note:
The milling cutters are alternately equipped with equal numbers of indexable inserts of forms NB2 and NB3. Comply with the assignment instructions on the cutter.
Standard application values for ae = 1×D.
Standard application values for ae = 1×D.