{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling PNEG 1106XNEN-GL, for face mills, CA420M
Article no.: 223318 GG
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | PNEG 1106XNEN-GL | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable | |
| Base form | pentagonal | |
| Insert width | 11 mm | |
| Blade thickness | 6.35 mm | |
| Insert length | 11.54 mm | |
| Insert version | neutral | |
| Cutting edge length | 11 mm | |
| Cutting edge height | 6.35 mm | |
| Insert diameter | 15.875 mm | |
| Corner radius | 1.4 mm | |
| Corner chamfer length | 2.6 mm | |
| Corner chamfer angle | 4 degrees | |
| Corner angle | 108 degrees | |
| Rake face chamfer width | 0.7 mm | |
| Rake face chamfer angle | 35 degrees | |
| Rake angle | 0 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| Cutting conditions | interrupted | |
| Cutting edge length, limited | 11 mm | |
| ISO-Code | PNEG 1106XNEN-GL | |
| Tool material | Carbide | |
| Machining group | K (cast iron); M (stainless steel); N (non-ferrous metals); P (steel) | |
| Tool application group | HOG | |
| Cutting media, manufacturer’s designation | CA420M | |
| Coating | TiCn-Al2O3 | |
| Grade | CA420M | |
| Insert thickness | 6.35 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | PN1106XN2N | |
| Interface coding for insert according to ISO TS 13399-60 | PN1106XN2N | |
| Insert designation | PNEG 1106XNEN-GL | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 10 pcs. | |
| Direction of action | neutral | |
| Suitable for material | cast iron (K); non-ferrous materials (N); stainless steel (M); steel (P) | |
| Tolerance Class | E | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | chamfered and rounded (S) | |
| Cutting conditions | interrupted | |
| Number of potential uses | 10 pcs. | |
| Weight | 20 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 223318 GG | |
| EAN / GTIN | 4960664732968 | |
| Manufacturer number | TMB05300 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
K
230
Description
Version:
10-edge pentagonal indexable inserts for stable and economical machining.
GL - surface-oriented geometry
GL - surface-oriented geometry
Note:
Standard application values for ae = 0.3×D.