{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling LOGU 030310 ER-GM, for high feed rate indexable face mills, PR1810
Article no.: 221975 GG
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | LOGU 030310 ER-GM | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable | |
| Base form | rectangular | |
| Insert width | 6.2 mm | |
| Blade thickness | 3.96 mm | |
| Insert length | 11.9 mm | |
| Insert version | right-hand | |
| Cutting edge length | 11.9 mm | |
| Cutting edge height | 3.96 mm | |
| Corner radius | 1 mm | |
| Corner angle | 90 degrees | |
| Rake face chamfer width | 0 mm | |
| Rake face chamfer angle | 0 degrees | |
| Rake angle | 10 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 16 degrees | |
| Cutting conditions | continuous | |
| ISO-Code | LOGU 030310 ER-GM | |
| Attachment hole diameter | 3.45 mm | |
| Type of chip breaker | GM | |
| Tool material | Carbide | |
| Machining group | S (difficult-to-machine materials) | |
| Tool application group | PR1810 | |
| Cutting media, manufacturer’s designation | PR1810 | |
| Coating | Megacoat Nano | |
| Insert thickness | 3.96 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | LO0303103R | |
| Interface coding for insert according to ISO TS 13399-60 | LO0303103R | |
| Insert designation | LOMU030310 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 4 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | heat-resistant super-alloys (S) | |
| Tolerance Class | G | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | continuous | |
| Number of potential uses | 4 pcs. | |
| Weight | 3 g | |
| Content | 10 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 221975 GG | |
| EAN / GTIN | 4960664026975 | |
| Manufacturer number | LOGU030310ER-GMPR1810 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
K
180
Description
Version:
Double-sided indexable insert with 4 cutting edges. The convex cutting edge version of the insert ensures gentle entry of the cutting edge into the material.
Note:
Standard application values for ae = 0.3×D / ap max = 1 mm.