{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling POMX 10T5ZESR R, for high feed rate indexable face mills, HB9715
Article no.: 213178 HART
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Manufacturer’s designation | POMX 10T5ZESR R | |
| Base form | pentagonal | |
| Insert width | 7.5 mm | |
| Blade thickness | 5.9 mm | |
| Insert length | 7.5 mm | |
| Insert version | right-hand | |
| Cutting edge length | 7.5 mm | |
| Cutting edge height | 5.9 mm | |
| Insert diameter | 14 mm | |
| Corner radius | 0.8 mm | |
| Corner chamfer length | 2 mm | |
| Corner chamfer angle | 19 degrees | |
| Corner angle | 108 degrees | |
| Rake face chamfer width | 0 mm | |
| Rake face chamfer angle | 16.5 degrees | |
| Rake angle | 16.5 degrees | |
| Normal clearance angle (main cutting edge) | 15 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 15 degrees | |
| Normal clearance angle (flat cutting edge) | 20 degrees | |
| Cutting conditions | interrupted | |
| ISO-Code | POMX 10T5ZESR R | |
| Attachment hole diameter | 4.8 mm | |
| Wiper length axial | 2 mm | |
| Tool material | Carbide | |
| Machining group | S (difficult-to-machine materials) | |
| Tool application group | HOG | |
| Cutting media, manufacturer’s designation | HB9715 | |
| Coating | TiAlN-PVD | |
| Grade | HB9715 | |
| Insert thickness | 5.9 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | PO10T5ZE3R | |
| Interface coding for insert according to ISO TS 13399-60 | PO10T5ZE3R | |
| Insert designation | POMX 10T5ZESR R | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 5 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | heat-resistant super-alloys (S) | |
| Tolerance Class | M | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Roughing | |
| Machining strategy | HPC | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | chamfered (T) | |
| Cutting conditions | interrupted | |
| Number of potential uses | 5 pcs. | |
| Weight | 9.34 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 213178 HART | |
| EAN / GTIN | 4045197714909 | |
| Manufacturer number | 213178 HART | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
H
50
H
40
H
35
H
30
K
300
Description
Version:
Sturdy insert version (thickness = 5.9 mm).
Positive geometry for high feed rates.
Flat cutting edge length: 2 mm for high surface quality.
Special cost-effectiveness due to 5 cutting edges.
Positive geometry for high feed rates.
Flat cutting edge length: 2 mm for high surface quality.
Special cost-effectiveness due to 5 cutting edges.
Note:
Standard application values for ae = 0.5 ... 1×D / ap max = 2.2 mm.