{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
| Number of cutters |
4 pcs.
|
|
| ISO-Code |
ANGX 10T308ZESR
|
|
| Corner radius R |
0.8 mm
|
|
| Grade |
HB9715
|
|
| Coating |
PVD
|
|
| Max. cutting depth, Side milling |
1 mm
|
|
| Max. cutting depth, Full slot milling |
1 mm
|
|
| Air |
suitable
|
|
| Cooling lubricant |
yes
|
|
| Base form |
rhomboidal
|
|
| Thickness of insert S |
3.97 mm
|
|
| Insert version |
right-hand
|
|
| Corner angle |
85 degrees
|
|
| Rake face chamfer width C |
0.09 mm
|
|
| Rake face chamfer angle |
14 degrees
|
|
| Normal clearance angle (main cutting edge) |
0 degrees
|
|
| Normal clearance angle (auxiliary cutting edge) |
0 degrees
|
|
| Attachment hole diameter |
2.76 mm
|
|
| Cutting depth, recommended working area, max. ap max |
0.4 mm
|
|
| Cutting depth ap, min. |
0.15 mm
|
|
| Cutting depth ap, max. |
1 mm
|
|
| Cutting depth in use |
Full slot milling; Side milling
|
|
| Feed rate per tooth min. fz |
0.5 mm
|
|
| Tool material |
Carbide
|
|
| Machining group, manufacturer-specific |
HART
|
|
| Machining group |
H (hard materials); K (cast iron)
|
|
| Cutting media, manufacturer’s designation |
HB9715
|
|
| Type of fastening for insert |
S (with counterbore screwed through hole)
|
|
| Interface coding for insert |
ANGX10T3
|
|
| Insert designation |
ANGX10T308ZESR
|
|
| Type of product |
cutter insert
|
|
| with ISO code |
yes
|
|
| Direction of action |
right-hand
|
|
| suitable for material |
cast iron (K); hardened steel (H)
|
|
| Tolerance class |
G
|
|
| Type of fastening |
hole
|
|
| Chip breaker |
yes
|
|
| Content |
single part
|
|
| Correction factor fz |
2.5
|
| Article number | 213068 HART | |
| EAN / GTIN | 4062406355463 | |
| Manufacturer number | 213068 HART | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |