{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Milling head, sharp-edged HPC, uncoated, ⌀ D h10: 25mm
Article no.: 210345 25
Article code:
Product details
Technical Data
| Coating | uncoated | |
| Machining strategy | HPC | |
| Overall length L | 71 mm | |
| Tool material | solid carbide | |
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Wet minimum | suitable only under restricted conditions | |
| Max. cutting depth, Side milling | 25 mm | |
| Max. cutting depth, Full slot milling | 25 mm | |
| Wet maximum | suitable | |
| Eingriffsbreite max. ae | 1×D; 0,3×D | |
| Interface position | on the machine | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable only under restricted conditions | |
| Air | suitable only under restricted conditions | |
| Cooling lubricant | yes | |
| Series | TopCut | |
| Machining group | N (non-ferrous metals) | |
| Tool application group | W | |
| Cutting media, manufacturer’s designation | HU730 | |
| Grade | HU730 | |
| Interface | joint 1 | |
| Weight | 271 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | Werksnorm | |
| Cutter diameter D1 | 25 mm | |
| Tolerance class | h10 | |
| Cutting edge length L1 | 25 mm | |
| Head length L | 45 mm | |
| Number of effective cutters (peripheral side) | 3 | |
| Number of effective cutters (end face) | 3 | |
| Twist direction | right-hand | |
| Helix angle | 42 degrees | |
| Machining method | shoulder milling (FEC); slot milling (FNU) | |
| Corner version | sharp-edged | |
| Corner chamfer angle | 90 degrees | |
| Direction of infeed | horizontal | |
| Content | single part | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.01 mm | |
| Cutting depth in use | Full slot milling; Side milling | |
| Type of product | end / face mill |
Identification & Classification
| Article number | 210345 25 | |
| EAN / GTIN | 4045197557674 | |
| Manufacturer number | 210345 25 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
530
N
500
N
450
N
320
Description
Note:
Standard application values for slots milled from solid at ap max≤ 0.5×D.