{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT Master Tap machine tap HSS-E-PM extra long Form C 6HX DIN 376, AlTiX, M: M6
Article no.: 136168 M6
Article code:
Product details
Technical Data
| Thread type | metric ISO coarse thread | |
| Tool material | HSS-E-PM | |
| Coating | AlTiX | |
| Thread D | M6x1 | |
| Thread pitch | 1 mm | |
| Core hole diameter | 5 mm | |
| Nominal diameter of metric thread D | 6 mm | |
| Overall length L | 160 mm | |
| Shank diameter DS | 4.5 mm | |
| Square-drive width across flats □ | 3.4 mm | |
| Thread tolerance class | ISO 2X 6HX | |
| Taper lead form | C | |
| Application for type of drilling | blind hole | |
| Twist angle | 40 degrees | |
| Standard | DIN 376 | |
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Series | Master Tap | |
| Manufacturer’s designation | GARANT Master Tap Maschinen-Gewindebohrer HSS-E-PM extra lang | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Length of shank LS | 124 mm | |
| Chisel edge diameter | 4.9 mm | |
| Length of tapping part Lc | 8.2 mm | |
| Tap infeed length | 2.5 mm | |
| Taper lead angle | 10.62 degrees | |
| Number of teeth | 3 | |
| Twist direction | right-hand | |
| Type of thread-cutting tool | machine tap for dynamic machining | |
| To depth (x diameter) | 2.5 | |
| Number of clamping slots | 3 | |
| Flank angle | 60 degrees | |
| Stepped shank | yes | |
| Cutting media, manufacturer’s designation | HSS-E-PM | |
| Interface | joint 1 | |
| Weight | 23 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Data carriers | without data carrier | |
| Machining method | thread processing internal (EGI) | |
| Colour ring | green | |
| Type of product | taps |
Identification & Classification
| Article number | 136168 M6 | |
| EAN / GTIN | 4062406719074 | |
| Manufacturer number | 136168 M6 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
24
N
28
N
16
P
24
P
24
P
20
P
10
P
6
M
8
M
6
K
16
N
16
Description
Version:
Universal taps, designed for use in a wide spectrum of materials with high process reliability.
With extra long shank.
All sizes with shank to DIN 376 (= shank ⌀ tapered). Therefore suitable for greater operating depths.
- HSS-E-PM tool material for maximum wear resistance.
- Reduced coefficient of friction due to the new high-performance coating.
- Special geometry for optimum swarf evacuation.
With extra long shank.
All sizes with shank to DIN 376 (= shank ⌀ tapered). Therefore suitable for greater operating depths.
Advantage:
Designed for tapping threads where access is difficult.